nsr500rossi Posted March 10, 2011 Share #1 Posted March 10, 2011 Advertisement (gone after registration) Hi, purchased a used M8 last week, i am already having problems with the scroll wheel. It is jumping between menus and i am unable to zoom in on photos. Now i upgraded the firm ware from 2.002 to 2.005, i am pretty sure it was fine with 2.002 I waited 3 seconds before attempting the firmware upgrade (well at least i think i did!!) I have reloaded the firmware 10 times now, i have also left the camera on overnight without battery as suggested in other threads, this did not reset the internal battery, i am sure it would take a lot longer than 24 hours to flatten and reset the internal camera battery.. Does anyone have any answer, any procedure i could try.. I am new to leica (also purchased an M2 a few weeks ago) i do love them both, but am pretty fed up to have a problem with the M8 already Thanks Mike Link to post Share on other sites More sharing options...
Advertisement Posted March 10, 2011 Posted March 10, 2011 Hi nsr500rossi, Take a look here Scroll wheel problem ..mad jumping .... I'm sure you'll find what you were looking for!
roydonian Posted March 11, 2011 Share #2 Posted March 11, 2011 Hi, purchased a used M8 last week, i am already having problems with the scroll wheel.Does anyone have any answer, any procedure i could try.. I recall that someone else had this problem and found a solution. If you use the forum's 'search' facility that should produce the posting in question. Good luck! Doug Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.