peterv Posted January 27, 2007 Share #1  Posted January 27, 2007 Advertisement (gone after registration) Hi all,  After reading this thread:  http://www.leica-camera-user.com/digital-forum/14467-m8-metz-54mz-4i-sca-3502m4.html  I bought the SCA 3502 today.  On the camera everything works fine, just as Furrukh, Jerome and Bill explained. Now here's my Question:  I've got 2 additional 54 MZ 4i's on a SCA 3083 slave adapter, and they do not respond to the flash on my M8...  The manual says this will only work in either TTL or A mode...  Does anyone here know how to make this function?  Thanks, Peter Link to post Share on other sites More sharing options...
Advertisement Posted January 27, 2007 Posted January 27, 2007 Hi peterv, Take a look here M8 + 3 Metz 54 MZ 4i.... I'm sure you'll find what you were looking for!
khanosu Posted January 27, 2007 Share #2  Posted January 27, 2007 Hi all, The manual says this will only work in either TTL or A mode...  Hi Peter, the pre-flash of the M8 is probably messing up the slaves. Which manual are you referring to?  Thanks, Furrukh Link to post Share on other sites More sharing options...
peterv Posted January 27, 2007 Author Share #3  Posted January 27, 2007 Hi Peter, the pre-flash of the M8 is probably messing up the slaves. Which manual are you referring to? Thanks, Furrukh   Hi Furrukh,  thanks for responding...  Both the manuals (flash and adapter) only mention the wireless remote flash possibility with the TTL and A mode, and from what I understood reading the posts about the flash/camera combination only Manua/GNC works... Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.