andreas_thomsen Posted October 13, 2009 Share #1 Posted October 13, 2009 Advertisement (gone after registration) when i shoot with my M9 and the summarit 75mm - capture one says it's 90 mm. anyome else notice that? cheers andy Link to post Share on other sites More sharing options...
Advertisement Posted October 13, 2009 Posted October 13, 2009 Hi andreas_thomsen, Take a look here M9 bug. I'm sure you'll find what you were looking for!
gravastar Posted October 13, 2009 Share #2 Posted October 13, 2009 No, but then I don't have a 75mm Summarit . Preview a picture on the camera using the "Play" button, then press the "Info" button. What does it say at the top right hand side of the screen. It should be 75mm. If it's something other than 75mm check the following. Is the lens mounted securely so that the catch on the bayonet mount clicks into place. If when you mount the lens you hold the catch down it's possible to over rotate the lens in the mount. That can cause the wrong focal length to be recognized. Remove the lens and check that the sensor strip at the bottom right of the camera's bayonet mount is clean. Also check that the black and white coding depressions on the lens mount are clean. If the camera indicates the correct focal length then it's a Capture One problem. Bob. Link to post Share on other sites More sharing options...
Leicaiste Posted October 13, 2009 Share #3 Posted October 13, 2009 when i shoot with my M9 and the summarit 75mm - capture one says it's 90 mm.anyone else notice that? cheers andy And check the code on that chart: Leica M8 Lens Codes Lucien Link to post Share on other sites More sharing options...
thrice Posted October 13, 2009 Share #4 Posted October 13, 2009 Is one of the white dots a little dirty? Checked to make sure your other lenses are properly detected? Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.