pinetar Posted September 12, 2006 Share #1 Posted September 12, 2006 Advertisement (gone after registration) I cleaned up the darkroom yesterday for my daughters benefit for school as well. Ilford Pan f 50 @ asa 25, Microdal-X. Not happy with my dev. results nor the scans based on a PC. Going back to the Mac setup-better software for the Agfa Arcus II with OS 9. This is a P'shop invert of the neg. Is that shutter lag on the right (first pic) , or just the difference experienced from the lens? Not all negs have that effect. gary Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/5056-mda-w-voigtlander-15mm-first-roll/?do=findComment&comment=48151'>More sharing options...
Advertisement Posted September 12, 2006 Posted September 12, 2006 Hi pinetar, Take a look here MDa w Voigtlander 15mm, first roll??. I'm sure you'll find what you were looking for!
Philippe D. Posted September 12, 2006 Share #2 Posted September 12, 2006 Hi, Is that shutter lag on the right (first pic) , or just the difference experienced from the lens?Not all negs have that effect. Looks like a shutter curtain problem to me. And especially at a certain speed, if this is not visible on every frame. Goto CLA. Link to post Share on other sites More sharing options...
pinetar Posted September 13, 2006 Author Share #3 Posted September 13, 2006 I am afraid you are right. The gearing release is not audiably consistent from 1/30th and slower. Is there anything a user can do to correct this? My investment in the body is $100 so far. Any idea on the expense of a timing repair? gary Hi, Looks like a shutter curtain problem to me. And especially at a certain speed, if this is not visible on every frame. Goto CLA. Link to post Share on other sites More sharing options...
Guest lll Posted September 13, 2006 Share #4 Posted September 13, 2006 Yes, as a user you can send the body to the CS :-)). The only thing you can do before, is to release the camera several times. Sometimes it helps to smoothen the shutter a little bit. But this is not reliable. Your Camera is around 30 Years old at least, so the bearings will be dry. You got it that cheap as it is not worth more without servicing and lubrication. So go and invest the "second part of the money" in a CLA in order to get a valuable camera. It is still cheap then. Regards Friedhelm Link to post Share on other sites More sharing options...
earleygallery Posted September 13, 2006 Share #5 Posted September 13, 2006 A CLA will probably put it right. UK prices are approx. £150 I think or $270. Link to post Share on other sites More sharing options...
pinetar Posted September 13, 2006 Author Share #6 Posted September 13, 2006 I believe you are all correct. I opened the back and watched how the curtain lags (never opening all the way) when closing, starting at 1/8th and never closing at 1000. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.