Derbyshire Man Posted December 11, 2023 Share #1 Posted December 11, 2023 Advertisement (gone after registration) Theoretical this but what happens if you get a dented/bashed up integrated hood on something like the new 35mm 1.4 Summilux 11276? Can you buy a new one and replace it if you get bored of the street cred of owning a road worn £6000 lens? Asking for an imaginary friend. Link to post Share on other sites More sharing options...
Advertisement Posted December 11, 2023 Posted December 11, 2023 Hi Derbyshire Man, Take a look here Damaged integrated hoods question. I'm sure you'll find what you were looking for!
TomB_tx Posted December 11, 2023 Share #2 Posted December 11, 2023 (edited) The hoods can be replaced, but as it isn't considered a user-replaceable part I doubt if Leica will sell you one. However a good independent Leica tech could do the job, and some may be able to restore the old hood. Edited December 11, 2023 by TomB_tx Link to post Share on other sites More sharing options...
Danner Posted December 11, 2023 Share #3 Posted December 11, 2023 Leica will have to be involved, it's a repair type service. Probably take some time to repair, and costly. Link to post Share on other sites More sharing options...
darylgo Posted December 11, 2023 Share #4 Posted December 11, 2023 Contact Leica Store Miami or look at their website parts section. If the part is available it is user replaceable. The Leica M 50mm Summilux Asph (1) has a user replaceable hood, very easily done by removing one screw. Hopefully this will help your imaginary friend 🙂 2 Link to post Share on other sites More sharing options...
Cattoo Posted December 11, 2023 Share #5 Posted December 11, 2023 You should be able to do this yourself. For $225 I replaced the hood on my 50mm summilux. It's very easy to do. The 35mm is a new model though so Leica Miami may not yet carry the hood. I would call if you don't see it listed. Link to post Share on other sites More sharing options...
elgenper Posted December 12, 2023 Share #6 Posted December 12, 2023 I did exactly this with my Summicron 75/2 a few years ago. Tripped over a dog leash and landed on the lens (both me and the dog were unharmed, but the lens shade wasn´t...). Managed to get the front ring off the lens, freeing the dented shade. My friendly and helpful Leica dealer got me a replacement shade directly from Leica, I mounted it, and all is well. 2 Link to post Share on other sites More sharing options...
Keith (M) Posted December 13, 2023 Share #7 Posted December 13, 2023 Advertisement (gone after registration) My 50mm Summilux-ASPH + M10M hit the deck from shoulder height, landing lens-down on a concrete floor. The hood was in the extended position and the impact resulted in quite a dent. In the end I sent it to Leica Mayfair who replaced the hood, cost me (IIRC) circa £70 all-in. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now