Damaged integrated hoods question

[Derbyshire Man]

Advertisement (gone after registration)

Theoretical this but what happens if you get a dented/bashed up integrated hood on something like the new 35mm 1.4 Summilux 11276? Can you buy a new one and replace it if you get bored of the street cred of owning a road worn £6000 lens?

Asking for an imaginary friend.

[TomB_tx]

The hoods can be replaced, but as it isn't considered a user-replaceable part I doubt if Leica will sell you one. However a good independent Leica tech could do the job, and some may be able to restore the old hood.

Edited December 11, 2023 by TomB_tx

[Danner]

Leica will have to be involved, it's a repair type service.  Probably take some time to repair, and costly.

[darylgo]

Contact Leica Store Miami or look at their website parts section.  If the part is available it is user replaceable.  The Leica M 50mm Summilux Asph (1) has a user replaceable hood, very easily done by removing one screw.  Hopefully this will help your imaginary friend 🙂

[Cattoo]

You should be able to do this yourself.  For $225 I replaced the hood on my 50mm summilux.  It's very easy to do.  The 35mm is a new model though so Leica Miami may not yet carry the hood.  I would call if you don't see it listed.  

[elgenper]

I did exactly this with my Summicron 75/2 a few years ago.  Tripped over a dog leash and landed on the lens (both me and the dog were unharmed, but the lens shade wasn´t...).  Managed to get the front ring off the lens, freeing the dented shade.  My friendly and helpful Leica dealer got me a replacement shade directly from Leica, I mounted it, and all is well.

[Keith (M)]

Advertisement (gone after registration)

My 50mm Summilux-ASPH + M10M hit the deck from shoulder height, landing lens-down on a concrete floor.  The hood was in the extended position and the impact resulted in quite a dent.  In the end I sent it to Leica Mayfair who replaced the hood, cost me (IIRC) circa £70 all-in.