Lens hood for the Elmarit 28mm Version 4

[kitreyes]

Advertisement (gone after registration)

Hi everyone! I just got the lovely Elmarit 28mm lens used (4th version, pre-ASPH). However it did not come with a hood. Can anyone suggest or recommend one for me? Third party is fine since original ones are expensive and/or hard to find. Thanks! 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

[hjddd]

The original hood are 12451， 12547 

[trisberg]

The Leica 12589 hood also fits this lens or you could get a 46mm screw-in metal hood from ebay like this one - https://www.ebay.com/itm/264632460681

-Thomas

 

Edited December 30, 2022 by trisberg
fix link

[dem331]

6 hours ago, trisberg said:

The Leica 12589 hood also fits this lens or you could get a 46mm screw-in metal hood from ebay like this one - https://www.ebay.com/itm/264632460681

-Thomas

 

This is what I use for my 28 mm Summicron. It works great and is compact. The original is in a draw somewhere- too cumbersome. 
I know that if I drop the lens I risk damaging the filter thread, so I try no to drop it. 

[Stein K S]

12466… I know, I know… on the rather rare & expensive side, but still one to look out for? And the v4 fitted with this hood also look really good… if I dare to say so 😉

Edited December 30, 2022 by Stein K S

[oekoek]

Or, if you can find one, a GG-1 screw-in metal hood originally for Contax G Zeiss 28mm f/2.8 Biogon. I use one, made by Kiwi, on my 28/2.8 IV works fine much smaller than the original Leica one. And i can't recall flair issues while using the GG-1, nor the original one, with the 28/2.8 IV.

[farhiz]

Advertisement (gone after registration)

See if this is what you’re looking for: https://otect.co/collections/all-products/elmarit-m-28mm-f2-8-asph.

The lenshood for my Summilux 35-M arrived yesterday from them and it’s perfect. 

[lct]

The five following Leica hoods work fine on the Summicron 28/2 asph v1 in my experience. Same on Elmarit 28/2.8 v4 AFAIK but i have no experience with the latter. PLease ask if you're after some pics of those hoods. 
1. Leica 12451: Big plastic rectangular hood dedicated to 28/2 asph v1 and 28/2.8 v4.
2. Leica 12466: Medium sized metal round hood dedicated to 35/1.4 asph pre-FLE, 28/2 asph v1 and 28/2.8 v4. Nice, expensive, difficult to find. Gets a bit in the way when turning the aperture ring.
3. Leica 12547: Big plastic rectangular hood dedicated to 28/2.8 v4.
4. Leica 12588: Medium sized plastic rectangular hood dedicated to 35/1.4 aspherical. My favorite but tends to fall off too easily.
5. Leica 12589: Medium sized plastic rectangular hood dedicated to 35/1.4 asph pre-FLE. Same as 12588 with a locking ring. More secure but the locking ring tends to get in the way when turning the aperture ring.

[Advertisement]

Hallo,

Look here: Leica M