Jump to content

SL2 HDMI Output to Stream in Full HD


gwater

Recommended Posts

Advertisement (gone after registration)

I read that the SL2 outputs HDMI, but only 4K DCI is listed for external recording. Am I missing something, or is the SL2 unable to output any other resolution than 4096 x 2160 via HDMI? I would like to stream in Full HD using an encoder such as the LiveU Solo. Would that be possible?

 

SL2 specs I read online:

 

Recording Modes MOV/H.264 10-Bit
5K (4992 x 3744) at 23.976p/25p/29.97p
DCI 4K (4096 x 2160) at 24.00p/25p/29.97p/50p/59.94p
UHD 4K (3840 x 2160) at 23.976p/25p/29.97p/50p/59.94p
Full HD (1920 x 1080) at 23.976p/25p/29.97p/50p/59.94p/100p/119.88p/180p
MP4/H.264 10-Bit
UHD 4K (3840 x 2160)23.976p/25p/29.97p/50p/59.94p
Full HD (1920 x 1080)23.976p/25p/29.97p/50p/59.94p/100p/119.88p/180p
External Recording Modes 10-Bit
DCI 4K (4096 x 2160) up to 59.94p
Edited by gwater
Link to post
Share on other sites

Yes - you can stream FHD (1920x1080) from the SL2. I've used this $20 HDMI-USB converter (link below), works like a charm providing FHD@30fps, even though it's only USB 2.0. It converts the UHD HDMI signal from the SL2 and you can use it to stream from your Mac (or PC I'm sure - not tested).

Here

Cheers,   -Peter

  • Like 1
Link to post
Share on other sites

  • 3 months later...
  • 1 year later...

I’m having trouble getting anything other than 1080 FHD out of my SL2-s, despite recording C4K internally. This is using my Odyssey 7Q+ recorder. Are there any settings in the SL2s that would dictate the HDMI output format? All I can find is the control to output RAW. 
 

Any help would be appreciated. Thanks!

Link to post
Share on other sites

On 12/17/2022 at 1:09 PM, matted said:

I’m having trouble getting anything other than 1080 FHD out of my SL2-s, despite recording C4K internally. This is using my Odyssey 7Q+ recorder. Are there any settings in the SL2s that would dictate the HDMI output format? All I can find is the control to output RAW. 
 

Any help would be appreciated. Thanks!

Never mind… I tried a different display device and am getting C4K output over HDMI. Must be either the cable or the Odyssey itself not allowing or not configured for 4K properly. Will see if I can dig up another cable (silly mini HDMI port on the Odyssey!) and tinker with the settings. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...