Recently Browsing 0 members
No registered users viewing this page.
By Sheepdog1512After shooting for a few minutes (or after a certain number of shots), the EVF displays a message that “burst shooting or recording in 4K is not available” (or something similar to that). Even though I am using a fresh battery, completely charged, the battery level quickly goes to the 50-75% range. I have the camera (SL2) set to shoot in high burst mode and I may get about 50 or so shots before this message is displayed. If you can only get 50 or so shots on high burst mode, this makes the battery/camera very limited if you need these high burst rates. Since I am new to Leica, I guess I have something set wrong. Any help is greatly appreciated.
By hotshewHi, I am new to the S system (S3) and I have yet to get a GPS lock when outdoors. The camera's GPS function is enabled (On) in the menus and the satellite indicator appears in the top LCD screen with an X, indicating no lock (and I can confirm no GPS metadata in image). Are there any known issues I should be aware of and, if not, how long does it typically take to get a GPS lock assuming open field with no line of site issues? I've searched the forum and found some GPS related post cover time sync problem, but I'm getting nothing. I'm not getting a lock in the same locations that I would get a fast (<10-15s) using my 1Dxii.
Any help appreciated,
By mcmarcyIch ärgere mich jedes mal darüber, dass ich beim Hineinzoomen in ein gerade geschossenes Foto immer irgendwo im Bild lande und nicht an der Stelle wo der Fokus zuvor beim Fotografieren festgelegt wurde. Was soll diese Sucherei? Wenn ich bei einem Porträt auf die Augen fokussiere, will ich bei der Bildkontrolle nicht irgendwo am Hals etc. landen, sondern genau auf den Augen. Bei anderen Marken wie z.B. Nikon klappt das immer! Ich habe vor Monaten schon einmal einen Verbesserungsvorschlag an Leica gesendet, der aber bisher nicht erhört wurde. Stört das niemanden von euch? Oder habe ich eine Funktion an meiner SL2 übersehen?
By BlackDocSome impressions from today, as i was asked to take some pics with the new Panasonic 24/50/85 lenses (all of them at min f1.8). I am testing not like others by taking pics from a wall, the lenses have to proof themselves by working with them.
Of course the pics are postprcessed as all of my pics but in short conclusion you will get good working lenses with good results. There might be some differences in pixlpeeping in high end prints (and on screen at 100% view) but this is not the normal view.
In this setting from todays morning i went into the cathedral, unfortunately i did not realize the beginning of the church service and it was too late to leave the tomb of henry the Lion and his wife Mathilde when the bells started to ring....
Hello guest! Please register or sign in to view the hidden content. Hallo Gast! Du willst die Bilder sehen? Einfach registrieren oder anmelden!
By intakHi, I shoot a lot of commercials.
I bought sl2 this time.
An incident occurred during the first commercial shoot using sl2.
The picture came in well on the capturer one, and there was no problem taking it.
Then, at some point, the camera went completely out of order.
Touch screens are not available and power buttons are not available.
If a stop occurs, the battery must be forcibly removed.
And when we film again, things go well, and at some point, af stutters.
It stops again.
This phenomenon continued to occur on the set.
Usage environment - macbook pro, capturer one, ether cable (usb C), sd card not used
I'll connect the link. I would appreciate it if you could check and tell me the cause.
Laika only says it's an SD card problem even if there's no problem at all.
There's no problem, so there's nothing I can do for you.
It's so frustrating.
SL2 All functions stopped.