Jump to content
Howard

Probelm on adjusting my leica m4 RF alignment

Recommended Posts

Advertisement (gone after registration)

Hello guys, I found that my lecia m4 RF alignment need to adjust. 

However, when I want to screw the biggest bolt in the mount, I found that I can't screw it.

 

It totally fixed. 

I google a lot of article, but I don't find anyone else has same problem like me.

AS a result I come here to ask you guys; is there anyone had same problem like me?8

Edited by Howard
tepo erro hallow->hello

Share this post


Link to post
Share on other sites
1 hour ago, convexferret said:

Can you confirm which of those screws you've been trying to turn? A picture with an arrow would be helpful

I only try on this the biggest screw. 

Share this post


Link to post
Share on other sites

excentric A is adjustement for infinity, B for 1m. Both need to be corrected alternatively (more steps) to get optimal result at infinity, 10m and 1m.
For A I have a special screwdriver, prepared in that way that it fills up completly the slid. If you use standard, stright screwdriver it may slip off the slid.


When adjusting A it is good to put a bigger distance shim between the arm and bayonet mount not to bend the arm.
If you still will not be able to turn A remove the whole arm (mark position of excentric shim under the screw B ) and try to turn it having the arm on flat surface and supported.

Edited by jerzy
spelling

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By ashley12234
      Hey everyone, 
      I just got my m2 off ebay and had a look through the viewfinder only to see 2 main very noticeable spots. I attached a picture and the one on the lower left looks much dimmer and looks like a dot and a hair almost? It's kind of light greyish and I think it's a particle or dust but I'm not quite sure. However, in the middle the speck seems much darker (basically black) and more prominent. Could this be separation or is it another speckle of dust (imo it doesn't seem like one). If this has happened to you or you know what it is, any input on how to fix or your thoughts would would be greatly appreciated! 
      Also the shutter curtain on the front seems a little pushed forward and I can see the whole seam on it, is that normal? The curtain works 100% fine but I'm not sure if Im supposed to see the whole seam and overlap of the two curtains. On the back it stays slightly open by 1mm or so (didn't include a pic sorry)... should it cause a light leak? The camera was also recently CLA'd.
      Lastly, the viewfinder has some "gold specks" which I think is separation, but I hope i'm wrong.  
      Please help if you can clarify, recommend a fix, or give any thoughts on ^^. Overall the camera seems amazing and none of the things I mentioned has really bothered me, but if I can learn more about them then it would be great.
      Thanks in advance, 
      Ashley

      Hello guest! Please register or sign in to view the hidden content. Hallo Gast! Du willst die Bilder sehen? Einfach registrieren oder anmelden!
    • By yaacovk
      Recently i buyed a flash with synch cable for my LEICA M4.
      After made one shot with the flash, i exidently pressed again on the shuter release without advancing to the next frame.
      I payed attention that the flash fired again.
      I want to mention that the shutter speed dial is in the flash mode
      Is it normal? or i have a problem?
      Thanks in advance.
      Yaacov.
    • By shoots
      SOS HELP!!!
      I dropped my Leica M4 and according to the NYC Camera Doctor repair team, the prism that creates the ghost image in the rangefinder is dislocated and needs to be replaced. They suggested that I send it directly into Leica for repairs, becuase the rangefinder is a complicated mechanism they wern't equipt to fix. They also let me know that Leica, located in New Jersey, dosen't do specific repairs and will want to do a full tune-up. Money is a concern, and I'm not prepared to pay $1000-ish if I can at all avoid it. I just want my range-finder to be functional.
      Has anyone had rangefinder work done, espeically on an M4? Would you advise having this work done by Leica or an outside repair person, such as DAG? Any experience or suggestions would be greatly appreciated.
      E
    • By JP1970
      Hello!
      I have a M4 and a M6. With the M6, the loading is super easy, basically dropping the film and close the bottom plate.
      With the M4, if I don't pay close attention to the loading and advancing 3 times before closing the bottom plate (checking that the film is taken up correctly), the film can loosen from the taking spool (tulip). This has happened a number of times and I always dread it might happen. Now, I think I have a workaround but I have to waste 2-3 frames.
      Any suggestions? If it needs a service, what would most likely be the parts? And being from 1970, would those be available?
      I love how the M4 feels and operates in my hands but the M6 TTL is more reliable...
       
      Kind regards, Joakim
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue., Read more about our Privacy Policy