Jump to content
Aidan

Q Sensor Issue?

Recommended Posts

Advertisement (gone after registration)

Hey folks - I just purchased a secondhand Q on eBay. It arrived today and I've been really enjoying the feel after shooting with a 240 over the last many years.

But when I started seeing the images in Lightroom my heart sank.

Can you take a look at this and tell me what I'm seeing here? Looks like the sensor is corrupted somehow?

Thank you!

Share this post


Link to post
Share on other sites

 Some of those spots are not birds. If other shots show the same, return the camera

Share this post


Link to post
Share on other sites
1 hour ago, jaapv said:

 Some of those spots are not birds. If other shots show the same, return the camera

This 

Share this post


Link to post
Share on other sites
Guest

my first Thought --Basejumpers or ParaTroops

 

anyway it looks weird

Share this post


Link to post
Share on other sites

  Best thing to do: take some shots of an evenly lit surface at different ISO settings, different apertures, focused and defocused. What do you find then?

Share this post


Link to post
Share on other sites
2 hours ago, Dave H said:

Those are all very uniform in their general shape I believe they are parachutes

 

Agreed.   Expand the image and I can see some chords.  It’s very easy to clarify whether there’s a fault on the sensor.  Just take one more image and check for similar artefacts.

however, the darker artefacts on the left may indicate a different problem.  If they are still present on a new image, then yes, return the camera.

i think they might be Leica parachutes being tested for remote delivery of Q2 to remote dealerships

please let us know the outcome. . 😊

Edited by lucerne

Share this post


Link to post
Share on other sites
56 minutes ago, Dave H said:

Be interesting to see the whole picture 

Why?

 

Share this post


Link to post
Share on other sites

I would attempt to take a clear blue sky photo at f/8 then take that image and the camera and return immediately to where you purchased it. I do not ever remember seeing any artifacts like you're showing previously with a Q. Dust spots yes, but not "parachutes". The Q should not have any artifacts like you're seeing. Good luck. Please inform us on the forum of any discoveries as to what is going on if you learn anything. Otherwise, find another Q. 

Share this post


Link to post
Share on other sites

To detect dust or spots on the sensor you do best to use the Leica M 240 advise. Smallest lens opening (Q2 f:16 defocus 30cm) take picture of evenly lit grey subject. Most convenient is to use an Expodisc in front of the lens.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By pdandurand
      Is it possible to set up the Leica Q to be used as a webcam for Zoom and other video conferencing meetings? If so, any suggestions on setting it up?
    • By onasj
      With the important caveat that this post is largely speculation, let's anticipate the performance characteristics of the M10-R sensor.
      The Leica S3 sensor is 45x30 mm (1350 sq mm) and the DNG files are 9816 x 6512, for a total pixel count of 63,921,792 pixels, or 47,349 pixels per sq mm
      The Leica M10 Monochrom sensor is 36 x 24 mm (864 sq mm) and the DNG files are 7864 x 5200 = 40,892,800 pixels, or 47,330 pixels per sq mm.
      The pixel density of the two sensors is so similar that I assume the discrepancy comes from non-scaling edge usage factors, and/or small 0.01 mm-scale rounding errors in sensor size.
      So if we assume that the S3 sensor and the M10 Monochrom sensor come from the same process, differing only in size and the presence of the Bayer color filter array in the former, then it's reasonable to assume the M10-R sensor also comes from the same process, and is basically a 36 x 24 mm crop of the S3 sensor (as others have hypothesized in this forum previously).  
      If this reasoning is correct, then you can expect the M10-R sensor to be the same as the M10M sensor, plus a Bayer CFA, and to perform more or less the same as the S3 sensor on a per-square-mm basis.  Therefore, I would expect:
      - DNG files that are 7864 x 5200 = 40,892,800 pixels
      - Dual gain design
      - 4.6 µm pixel pitch
      - Base ISO = 100
      - ISO range = 100-50,000 (basically one stop lower than the 160-100,000 ISO range of the M10 Monochrom, as one might predict from the lack of the Bayer CFA in the M10M)
      - 14 bits per pixel
      Good ISO 12,500 photos and decent ISO 25,000 photos would be terrific, and a significant improvement over the M10/M10-P, as noted here:
      https://photorumors.com/2019/01/20/mega-shootout-sony-leica-and-phase-one-comparison/
    • By Jonsekulla
      Hi all, 
      does anyone know what is going on here?
      All of sudden every photo is like this or a different shape with sometimes a bit of the actual image
      sensor?
      sd card?
      processor?
      any help before sending it away would be much appreciated!

      Hello guest! Please register or sign in to view the hidden content. Hallo Gast! Du willst die Bilder sehen? Einfach registrieren oder anmelden!
    • By cboy
      Hi all,
      Is the leica Q square lens hood can be used on the leica X? They seem similiar lens size. Has anyone tried? Im wishing to try as i have a leica X typ 113
       

      Hello guest! Please register or sign in to view the hidden content. Hallo Gast! Du willst die Bilder sehen? Einfach registrieren oder anmelden!
      Hello guest! Please register or sign in to view the hidden content. Hallo Gast! Du willst die Bilder sehen? Einfach registrieren oder anmelden!
    • By ashley12234
      Hey everyone, 
      I just got my m2 off ebay and had a look through the viewfinder only to see 2 main very noticeable spots. I attached a picture and the one on the lower left looks much dimmer and looks like a dot and a hair almost? It's kind of light greyish and I think it's a particle or dust but I'm not quite sure. However, in the middle the speck seems much darker (basically black) and more prominent. Could this be separation or is it another speckle of dust (imo it doesn't seem like one). If this has happened to you or you know what it is, any input on how to fix or your thoughts would would be greatly appreciated! 
      Also the shutter curtain on the front seems a little pushed forward and I can see the whole seam on it, is that normal? The curtain works 100% fine but I'm not sure if Im supposed to see the whole seam and overlap of the two curtains. On the back it stays slightly open by 1mm or so (didn't include a pic sorry)... should it cause a light leak? The camera was also recently CLA'd.
      Lastly, the viewfinder has some "gold specks" which I think is separation, but I hope i'm wrong.  
      Please help if you can clarify, recommend a fix, or give any thoughts on ^^. Overall the camera seems amazing and none of the things I mentioned has really bothered me, but if I can learn more about them then it would be great.
      Thanks in advance, 
      Ashley

      Hello guest! Please register or sign in to view the hidden content. Hallo Gast! Du willst die Bilder sehen? Einfach registrieren oder anmelden!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue., Read more about our Privacy Policy