rocky Posted March 11, 2019 Share #1 Posted March 11, 2019 (edited) Advertisement (gone after registration) Am especially interested in how well the RRS grip works on an M10. I just did a test shoot of an M10, and most definitely like this camera; however, it was a bit awkward holding the camera when switching back and forth from landscape to portrait, so I thought Really RIght Stuff (RRS) might help. I use L-brackets on two Canon 1-series bodies, and the L-bracket on the left side of the body is easy to grip whether shooting landscape or portrait. Also, RRS has a hand grip that mounts on the right side of the body of the M10, and would love to hear from someone who has the hand grip to see how well it works. Edited March 11, 2019 by rocky typos Quote Link to post Share on other sites More sharing options...
Advertisement Posted March 11, 2019 Posted March 11, 2019 Hi rocky, Take a look here Anybody using Really Right Stuff (RRS) Gear?. I'm sure you'll find what you were looking for!
pico Posted March 11, 2019 Share #2 Posted March 11, 2019 15 minutes ago, rocky said: Am especially interested in how well the RRS grip works on an M10. I just did a test shoot of an M10, and most definitely like this camera; however, it was a bit awkward holding the camera when switching back and forth from landscape to portrait, so I thought Really RIght Stuff (RRS) might help. I use L-brackets on two Canon 1-series bodies, and the L-bracket on the left side of the body is easy to grip in whether shooting i landscape or portrait. Also, RRS has a hand grip that mounts on the right side of the body of the M10, and would love to hear from someone who has the hand grip to see how well it works. I use RRS grips on M7, M9 and M10. I have long fingers and it still works well. However, the left side L attachment is too close to the body to be much good for gripping. Quote Link to post Share on other sites More sharing options...
rocky Posted March 11, 2019 Author Share #3 Posted March 11, 2019 (edited) OK, that's good to hear the hand grip works well for you. On my Canon gear the L-bracket on the left side extends out 1/2 inch or so behind the body giving me something to hang onto which works great for shooting landscape, and rotating the body 90 degrees for portraits, the front edge of the L-bracket rests in the palm of my hand with the thumb and forefinger wrapped around the focus ring and the middle, ring finger curled around the lens and the little finger grasping the bottom of the L-bracket. Guess I'll have to wait and see. I'm happy you like the RRS handgrip for the M10. Do you also use the thumb support? Edited March 11, 2019 by rocky typo Quote Link to post Share on other sites More sharing options...
pico Posted March 11, 2019 Share #4 Posted March 11, 2019 10 minutes ago, rocky said: Do you also use the thumb support? I do not use an add-on thumb support on any Leica. Quote Link to post Share on other sites More sharing options...
Gobert Posted March 11, 2019 Share #5 Posted March 11, 2019 I use the L-Bracket. But only for tripod use. Although perfect quality, I prefer the camera without. 1 Quote Link to post Share on other sites More sharing options...
rocky Posted March 11, 2019 Author Share #6 Posted March 11, 2019 Thanks for the info, Pico, and thank you Gobert. Looks like I may be able to take off the L-bracket when not using a tripod. Quote Link to post Share on other sites More sharing options...
Gobert Posted March 11, 2019 Share #7 Posted March 11, 2019 Advertisement (gone after registration) Correct. It replaces the original bottom. 5 sec job. Quote Link to post Share on other sites More sharing options...
JAC Posted March 11, 2019 Share #8 Posted March 11, 2019 I just use the Leica thumb grip and it works for me. Quote Link to post Share on other sites More sharing options...
digger1914 Posted March 11, 2019 Share #9 Posted March 11, 2019 I use the RRS base plate with their BH-30 Ballhead on my M10, and it is a great combination. The ball head is ideal for the weight of the camera. I also use a Thumbs Up. Gadget boy! Quote Link to post Share on other sites More sharing options...
Gobert Posted March 11, 2019 Share #10 Posted March 11, 2019 Just now, digger1914 said: I use the RRS base plate with their BH-30 Ballhead on my M10, and it is a great combination. The ball head is ideal for the weight of the camera. I also use a Thumbs Up. Gadget boy! I still have the BH50 from my DSLR time. Great piece of equipment, but somewhat overkill for a M10. Quote Link to post Share on other sites More sharing options...
riepibcx Posted March 11, 2019 Share #11 Posted March 11, 2019 I love the RRS L brackets for tripod use with my M10 and my Canons. I have the bracket and grip for my M10, but I don't find the grip particularly ergonomic and I'm kind of disappointed with it, so I don't keep it on the camera unless I'm going to be using a tripod. (I don't have a thumb grip.) Truth be told, I like what Leica's half case does for handling, and have one of those on my camera for hand-held use. Quote Link to post Share on other sites More sharing options...
pixelman Posted March 11, 2019 Share #12 Posted March 11, 2019 I use an RRS L Bracket on my MP240. I don’t use the grip. Works great. When hand holding, I use a half case with a built in grip. Quote Link to post Share on other sites More sharing options...
pico Posted March 11, 2019 Share #13 Posted March 11, 2019 (edited) An interesting aside: when I got my first M9 I put a strip of staircase texture on the RRS grip. It helped a lot. Later I bought another M9 and it had an RRS grip with the very same modification. Perhaps it is a good idea. Edited March 11, 2019 by pico Quote Link to post Share on other sites More sharing options...
Linford Posted March 11, 2019 Share #14 Posted March 11, 2019 Like Gobert, I too use the BH-30 and find it perfect for the M. I have used the L-brackets on the M240 and now on the M10-D. Because of the weight I do not keep it on the camera. I use it only when I use a tripod. Good luck. RRS is very good quality iIMO. Cheers--linford Quote Link to post Share on other sites More sharing options...
Fedro Posted March 12, 2019 Share #15 Posted March 12, 2019 I use their L brackets (for SL and X1D) as well as tripod, clamps and two ball heads (18 and 30). I have never had a problem Really solid stuff - alas not cheap - but then again, what is? Quote Link to post Share on other sites More sharing options...
DaveSee Posted March 14, 2019 Share #16 Posted March 14, 2019 RRS plates are, as used, good kit. Regarding M10--& M(2*) digitals... the mount-plate attaches in the camera body, unlike earlier M's, whether film or digital, which mount is in the base-plate. So you should know: switching battery or SD card will require removal of the mount plate on M2(4*) & M10 variants to access these. I use an Acratech "Ultimate Ball Head" on a Ries H100, or Bogen 3001+3025 head (Okay, have been in this for a while )... both with RRS plates (Arca-Swiss compatible/aligned). Had an RRS L-bracket until I ventured into the realm of "ball-head" tripod mount... M's before M(2*) models: the RRS 30 D (not L shaped, tripod mounting screw at "left" of base plate), except the M8 (M9+, dunno)) (now tripod mount centered-to-the-lens/film-plane mount), RRS "BP-CS," affords a M5 "vertical" strap option too Unfortunately, I must attach tripod mounting plates higgledy-piggley," with the M10, where I could simply attach & move on.... in hand, as Alessi's founder quipped: "great design." Okay in hand, as we know, yet M10 variants do not need in body tripod mount as M(2*) variants did... yet they do, unfortunately. in uniton, Dave Quote Link to post Share on other sites More sharing options...
DickieT Posted March 14, 2019 Share #17 Posted March 14, 2019 RRS is great and I have been using it on various camera's over the past 20 years. To offer an alternative view : I like the Leica handgrips - I use the 14405 on my film M's and have used the 14496 on my MP240 before I traded it for a M10-D (no need for a grip on that one for me). So I only use a simple B9 plate when I want to use my BH30 ballhead, which is not too often. I guess only if I would use ballhead more regular, I would consider replacing the base plat for a RRS one but they are a little bulky for my taste.. Quote Link to post Share on other sites More sharing options...
derleicaman Posted March 14, 2019 Share #18 Posted March 14, 2019 RRS is great with excellent quality and a well thought out system. However, I feel they are more suited to SLR users. I used their plate and head with my Nikon DSLRs and the M9. With the M10, I was less than enthusiastic with the plate for the M10. If I was doing a lot more work on a tripod, I might buy it. Reality is, I only do tripod work occasionaly these days. I felt the Novoflex Magic Ball to be a much better solution. The whole setup is very small and light, is made with incredible quality and precision and works well with my Gitzo CF Traveller tripod. The ball attaches to the camera in seconds and snaps into the quick release base receiver and you're ready to go. It takes more time to set up the tripod. The ball also makes a nice hand grip on the M10 and also comes with a chest pod/cup that is easy to use too. For the record, I have no affiliation with Novoflex. I am a ball head junky though, with too many to admit to, so I have used/experienced most of what is out there. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! 1 Quote Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/295128-anybody-using-really-right-stuff-rrs-gear/?do=findComment&comment=3702417'>More sharing options...
albertknappmd Posted March 14, 2019 Share #19 Posted March 14, 2019 I use the RRS L plate and have no issues. Albert Quote Link to post Share on other sites More sharing options...
charlie9089 Posted March 15, 2019 Share #20 Posted March 15, 2019 I have an M10-P and an RRS L-grip - works really well. Although you only really "need" it for a heavier lens like the 90mm Summicron I use it with smaller lenses as well because I can't be bothered to change the base when I change lenses. I prefer the RRS grip to the Leica alternative although from a design point of view the RRS does not match the Leica ( I don't care, functionally it works well). I personally like using a grip for most cameras as it just makes the camera easier to handle, I have a big battery grip for my Canon 5D mk4 which I never take off. Quote Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.