I’m a computer science engineer who has been working, as a hobby, the last three years in a new, more precise, way of recreating film look with digital cameras.
I’m posting here for feedback, in case anybody of you would like to test the application (with the M9) and show the results and your opinions.
I usually shoot film photography but also I like the comfort of digital. The problem is that I’ve never been happy with existing film emulations. Mainly because of that, because they are emulations instead of simulations.
For doing so, instead of doing a generic conversion for every camera, I’ve done a specialised conversion for the Leica M9 based on simulating the chemical process and spectrum response, instead of applying curves and other stuff.
In the end, I thought, if analog and digital are just two instruments which capture light, I thought, maybe is there any mathematical conversion to make the digital to look like film?
I mean, if I take the same photo with analog and digital, under exact same conditions (light / aperture / exposition /…) could I make them look exactly the same?
It’s based on chemical simulation and the Leica M9’s response to spectrum. Then LUTs and finally some extra calibration. I think that it could be improved because I’ve used home made or open source tools for calibrating and so on, which are far from perfect.
EXAMPLES (Analog vs Converted Digital)
Following are some examples of Superia 200 and TriX 400.
Click in each photo to see high resolution.
DNGs shoots taken with Leica M9 (left), and FILM shoots taken with Minolta CLE (right) at same conditions (aperture / exposition / ISO).
All shoots taken with Zeiss Biogon T* ZM 35mm f/2.
The examples show several photos, which are the following:
| original DNG | |
| converted DNG | scanned FILM |
| developed DNG | developed FILM |
For the generated simulated negative TIFF file and the scanned TIFF file I’ve applied exactly the same develop parameters.
TriX 400 - 1
TriX 400 - 2
TriX 400 - 3
Superia 200 - 1
Superia 200 - 2
Superia 200 - 3
Superia 200 - 4
Superia 200 - 5
Superia 200 - 6
Tonal range - Biggest difference between digital and film
Dynamic range - Digital is faaar more detailed in the blacks, film never gets burnt, meanwhile digital gets burn quite fast.
Film has more microcontrast, it's more sharpen
Digital is a little bit more contrast after developing, I imagine it’s because it reach white level faster, then, when doing autolevels with the developing program, as a result, it’s a more contrast image.
I'm having a console application ready, if interest is shown it will be ready quite soon!
CAVEHEATS / LIMITATIONS
The program only accept DNG, because I need all the light captured by the camera, instead of a JPG already converted and really dependent on camera self made adjustments.
The program only accepts photos taken at the ISO of the certain film that is gonna be used. For example, for TriX400 it will accept only Leica M9 DNGs at 400 ISO. I’ve also done tests with ISO 200 and 800, and the results were quite satisfactory but, for complexity reasons, I prefer to let it be native film ISO for the moment.
Highlights are not always correct, and sometimes they look weird, mainly in color film. This is due to bayer sensor pattern and its different intensity response (for Red, Green and Blue channels).
FUTURE (& PAST) WORK
Super thanks to the creator of LibRaw, a wonderful C++ library for working with RAW files.
Any questions I’m open to answer 🙂
Best regards everybody.
Tomás AKA “Camalogica”
Over the span of about six years I went from an M9-P to an M240-P and recently an M10-P. What struck me immediately was how similar the M10 and M9 files were in terms of color and contrast. The M240 files reminded me of Kodak Portra film whereas the M10 output just reminded of the M9. I thought i was alone in this observation until i read this article today.
Hello guys, I found that my lecia m4 RF alignment need to adjust.
However, when I want to screw the biggest bolt in the mount, I found that I can't screw it.
It totally fixed.
I google a lot of article, but I don't find anyone else has same problem like me.
AS a result I come here to ask you guys; is there anyone had same problem like me?8
Hello guest! Please register or sign in to view the hidden content. Hallo Gast! Du willst die Bilder sehen? Einfach registrieren oder anmelden!
M9 with new sensor and upgraded top plate
The camera is in excellent condition as it has been used with a half case since new. The sensor was replaced June 2015 and was recently serviced in 2018. The top plate was upgraded to the M9P top plate at the time of sensor replacement
The camera has not been used a great deal as I've used other systems as well as this and so has only 6214 actuation's. I'm offering the M9 with a Leicatime/Luigi leather half case with drop down flap and neck strap as well as thumbsUp. and two OEM batteries plus charger
If the half case and thumbs up is not required then i'm happy to split
Complete with all original packaging and documentation
Additional higher resolution photos are available on request
Free shipping within UK and EU
Payment via PayPal is preferred
All genuine offers considered
Recently Browsing 0 members
No registered users viewing this page.