jaapv Posted January 13, 2019 Share #21 Posted January 13, 2019 Advertisement (gone after registration) A Sharpie is what we would call a "watervaste viltstift" It works for coding, but tends to wear off. Be careful not to smear the window of the 6-bit sensor. Quote Link to post Share on other sites More sharing options...
Advertisement Posted January 13, 2019 Posted January 13, 2019 Hi jaapv, Take a look here Summilux 28mm on Leica M9 not supported?. I'm sure you'll find what you were looking for!
Naampje Posted January 13, 2019 Share #22 Posted January 13, 2019 Thanks Jaap, positioning the dots was more what I meant to ask. Quote Link to post Share on other sites More sharing options...
lct Posted January 13, 2019 Share #23 Posted January 13, 2019 9 hours ago, Naampje said: [...] positioning the dots was more what I meant to ask. My 7artisans 35/2 was sold with drilled pits already, which doesn't seem the case for the 28/1.4 i have no experience with. I don't know if the 28/1.4's flange has a recessed part for DIY coding either. It is not necessary per se but the dots may last longer this way. For positioning the dots, i use a Match Technical coding kit personally but it is now discontinued. Doesn't work with all lenses but worth a try if you can find one. Otherwise a DIY template can be found on the web together with instructions (links below). I have no experience with it though. http://www.bophoto.com/M8/2009-01-23-M-codeing.jpghttp://bophoto.typepad.com/bophoto/2009/01/m8-coder-simple-manual-handcoding-of-m-lenses.html Quote Link to post Share on other sites More sharing options...
DandA Posted January 13, 2019 Share #24 Posted January 13, 2019 3 hours ago, lct said: My 7artisans 35/2 was sold with drilled pits already, which doesn't seem the case for the 28/1.4 i have no experience with. I don't know if the 28/1.4's flange has a recessed part for DIY coding either. It is not necessary per se but the dots may last longer this way. For positioning the dots, i use a Match Technical coding kit personally but it is now discontinued. Doesn't work with all lenses but worth a try if you can find one. Otherwise a DIY template can be found on the web together with instructions (links below). I have no experience with it though. http://www.bophoto.com/M8/2009-01-23-M-codeing.jpghttp://bophoto.typepad.com/bophoto/2009/01/m8-coder-simple-manual-handcoding-of-m-lenses.html The 7artisans 28mm f1.4 at this juncture, does not have any coding pits nor a recessed part for the DIY coding not to rub off. Why no pits is a mystery but even more so, why no receesed part/ring surrounding the lens mount. Either one would have been helpful and with their having such with their 35mm f2, I don't see why this changed. The self calibration of front/back focusing with this lens is both easy and a wonderful idea nd wish all rangefinder lenses would incorporate this feature. The lens deserves the accolades it has received, especially at its price point. Dave (D&A) 1 1 Quote Link to post Share on other sites More sharing options...
jdlaing Posted January 14, 2019 Share #25 Posted January 14, 2019 2 hours ago, DandA said: The 7artisans 28mm f1.4 at this juncture, does not have any coding pits nor a recessed part for the DIY coding not to rub off. Why no pits is a mystery but even more so, why no receesed part/ring surrounding the lens mount. Either one would have been helpful and with their having such with their 35mm f2, I don't see why this changed. The self calibration of front/back focusing with this lens is both easy and a wonderful idea nd wish all rangefinder lenses would incorporate this feature. The lens deserves the accolades it has received, especially at its price point. Dave (D&A) No coding pits as there is no Leica lens to match it to. It is different than the Leica 28mm corrections. Or so I’ve been told. 1 Quote Link to post Share on other sites More sharing options...
Naampje Posted January 14, 2019 Share #26 Posted January 14, 2019 (edited) Thanks all, so I guess some modern M lenses need correction, what could those be for for instance the 28 Summilux? Because what Fiftyasa showed was quite impressive the before and after vignetting effect of coding it or not. Are there downsides to this? Is it clear what each profile for these lenses does exactly? And how would you, perhaps Fiftyasa, compare this to a pre ASPH 28 Elmarit? Or anybody else have any comparisment? I basically only see two downsides to this lens, size/ weight, and fully open in very light conditions, colour glowing a bit towards chromatic aberation? But this is a amateurs guess. Besides this, I'm very impressed. This is one of the sharpest examples fully open. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Edited January 14, 2019 by Naampje 1 Quote Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/292497-summilux-28mm-on-leica-m9-not-supported/?do=findComment&comment=3664657'>More sharing options...
Naampje Posted January 14, 2019 Share #27 Posted January 14, 2019 Advertisement (gone after registration) Here's a crop of the eyes, quite sharp I think. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! 1 1 Quote Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/292497-summilux-28mm-on-leica-m9-not-supported/?do=findComment&comment=3664660'>More sharing options...
lct Posted January 14, 2019 Share #28 Posted January 14, 2019 22 hours ago, jdlaing said: No coding pits as there is no Leica lens to match it to. It is different than the Leica 28mm corrections. Or so I’ve been told. Looks like Leica 28/1.4 is the best correction according to the OP's review. Too bad coding pits have not been drilled the same way as on the 7a 35/2. Quote Link to post Share on other sites More sharing options...
jdlaing Posted January 15, 2019 Share #29 Posted January 15, 2019 48 minutes ago, lct said: Looks like Leica 28/1.4 is the best correction according to the OP's review. Too bad coding pits have not been drilled the same way as on the 7a 35/2. If it’s off even a little I’d rather correct in post processing. Quote Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.