Per P. Posted December 15, 2018 Share #1 Posted December 15, 2018 Advertisement (gone after registration) Until some of the recent "upgrades" to Lightroom Classic I was using a preset for b&w with the embedded M10 profile as a starting point, then adjusted with the B&W mix. This no longer seems possible, I can either use the embedded profile with saturation -100 but then without the B&W mixer channel or use the Adobe profile with the B&W mixer. In my opinion the embedded B&W rendering is nicer so this is a bit frustrating. Am I missing a trick somewhere? Link to post Share on other sites More sharing options...
Advertisement Posted December 15, 2018 Posted December 15, 2018 Hi Per P., Take a look here Using the embedded profile for b&w?. I'm sure you'll find what you were looking for!
evikne Posted December 15, 2018 Share #2 Posted December 15, 2018 (edited) I agree that the M10 B&W profile is nice, and it is still available. I have mine under both "Profiles" and "Legacy" in the Profile browser (click on the four small squares at the top right of the Basic palette). If you add it as a favorite, it will also appear under "Favorites". Edited December 15, 2018 by evikne Link to post Share on other sites More sharing options...
Per P. Posted December 16, 2018 Author Share #3 Posted December 16, 2018 Yes I can find it. But what puzzles me is that I cannot use it in combination with the LR Black and White channel mixer Link to post Share on other sites More sharing options...
evikne Posted December 16, 2018 Share #4 Posted December 16, 2018 These two simultaneously? I cannot see any problems with that. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! 1 Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/292319-using-the-embedded-profile-for-bw/?do=findComment&comment=3648398'>More sharing options...
Per P. Posted December 16, 2018 Author Share #5 Posted December 16, 2018 Thank you very much for responding. Your screenshot is EXACTLY what I would like to see so if I was looking at your computer I would also not see what the problem is 🙂 But if I select the Leica M10 profile and click on "Treatment: Black & White" then the profile automatically changes to Adobe Monochrome. And if I do it the other way around, click on "Treatment: Black & White" first and now select the Leica M10 profile then the picture changes back to colour. So I must be missing a detail somewhere. Link to post Share on other sites More sharing options...
evikne Posted December 16, 2018 Share #6 Posted December 16, 2018 Perhaps you choose the M10 color profile? There are two M10 profiles – one color and one B&W. 1 Link to post Share on other sites More sharing options...
Per P. Posted December 17, 2018 Author Share #7 Posted December 17, 2018 Advertisement (gone after registration) Thank you, thank you, thank you!! You are absolutely right. I had marked the color profile as a favourite and then, at some point, I must have unclicked "Legacy" in the "Manage Profiles" function. Therefore the B&W profile simply did not show. Link to post Share on other sites More sharing options...
evikne Posted December 17, 2018 Share #8 Posted December 17, 2018 You're welcome! It's easy to get confused when the names are so similar. I must admit I got confused too, when I said that the M10 B&W profile was located in both the "Profiles" and "Legacy" group. Because the B&W profile is only in the "Legacy" group, while the one in the "Profiles" group is the M10 color profile. 😁 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now