frame-it Posted November 18, 2018 Share #1 Â Posted November 18, 2018 Advertisement (gone after registration) Hi, any issues to be aware of while using iiic/iiif/M3/M5 in really cold wintry weather ? Quote Link to post Share on other sites More sharing options...
Advertisement Posted November 18, 2018 Posted November 18, 2018 Hi frame-it, Take a look here iiic/iiif/M3/M5 cold weather. I'm sure you'll find what you were looking for!
pico Posted November 18, 2018 Share #2 Â Posted November 18, 2018 15 minutes ago, frame-it said: Hi, any issues to be aware of while using iiic/iiif/M3/M5 in really cold wintry weather ? Only when it stops working usually due to old lubricant. Â 1 Quote Link to post Share on other sites More sharing options...
Ko.Fe. Posted November 18, 2018 Share #3 Â Posted November 18, 2018 What is really cold for you? I have film broke in M because it was cold for film, but not for me and M. 1 Quote Link to post Share on other sites More sharing options...
105012 Posted November 18, 2018 Share #4  Posted November 18, 2018 I've photographed down to -20 degrees C with an M3 (I'm certain others have done it in colder temperatures). This was in Korea. I didn't notice any issues other than the film was very brittle, so I took care winding it on, but no problems with the film occurred. 1 Quote Link to post Share on other sites More sharing options...
frame-it Posted November 18, 2018 Author Share #5  Posted November 18, 2018 1 hour ago, 105012 said: I've photographed down to -20 degrees C with an M3 (I'm certain others have done it in colder temperatures). This was in Korea. I didn't notice any issues other than the film was very brittle, so I took care winding it on, but no problems with the film occurred.  thank you for the information..yes around -15 to -20celsius. Quote Link to post Share on other sites More sharing options...
dsj Posted November 18, 2018 Share #6  Posted November 18, 2018 One problem I have faced in the past with Ms in the cold is the 1/1000 sec not working properly, leading to uneven exposures. So I would refrain from using the fastest shutter speed. 1 Quote Link to post Share on other sites More sharing options...
a.noctilux Posted November 18, 2018 Share #7  Posted November 18, 2018 (edited) Advertisement (gone after registration) In your list, I'd not use IIIc, as the shutter mechanism is older style (if I remember well, must be treated by factory back then, for cold weather use). IIIf if it's with old type shutter may have trouble, if your IIIf is Red Dial type (new kind of shutter), may be ok. ... I've used IIIg about -15 °C and the other film M had never trouble, less than digital M plus cold battery. Benefit of using "button wind/rewind" in cold weather is not to damage film with "rapid wind lever". M5 to be kept near body if the light meter is used (to keep it's battery warm). Edited November 18, 2018 by a.noctilux typo 1 1 Quote Link to post Share on other sites More sharing options...
frame-it Posted November 18, 2018 Author Share #8 Â Posted November 18, 2018 yes my iiif is the Red dial version. Â thanks for all the info. Quote Link to post Share on other sites More sharing options...
spydrxx Posted November 18, 2018 Share #9 Â Posted November 18, 2018 I've never had a camera problem with any of my cameras in cold weather, but that is probably because I typically keep the cameras inside my jacket until I take a shot, providing a moderate temp for it. For me the bigger issue is occasional fogging the eyepiece due to the temperature differential between my forehead/eye and the colder temperature of the eyepiece. A little practice and the issue is usually quickly resolved. 1 Quote Link to post Share on other sites More sharing options...
A miller Posted November 19, 2018 Share #10  Posted November 19, 2018 nope, but the colder it gets the more swear words you will utter when changing film... 😆 1 1 Quote Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.