albert Posted June 14, 2018 Share #1 Posted June 14, 2018 Advertisement (gone after registration) My VLUX 114 is set on pin point focus. For two years I have pushed the button half way down for for perfect focus, then pulled the trigger. Today, when I push the trigger half way down the camera immediately fires away. HELP Also, should I consider a Q? Quote Link to post Share on other sites More sharing options...
Advertisement Posted June 14, 2018 Posted June 14, 2018 Hi albert, Take a look here Help Me Pls. Stuart, Brent, and Bill. I'm sure you'll find what you were looking for!
Bill W Posted June 15, 2018 Share #2 Posted June 15, 2018 My wife has a V114 but I do not know much about it. Is there a setting that changed inadvertently? Can you do a factory reset? And I am not sure if I am the Bill you are referring to. I have never owned the Q but it is a very nice camera. If your V114 is not going to work for you, why not get another one? FWIW. Quote Link to post Share on other sites More sharing options...
stuny Posted June 15, 2018 Share #3 Posted June 15, 2018 The other Bill is Bill Schneider from the Pacific NW. I've not experienced this, and assuming you're certain that it's not "pilot error," the first two things I'd try are: taking out the battery and reinstalling it, and see if that makes a difference. In the menu do a reset to factory settings. That of course removes any settings you've made (date, time, time zone, language, resolution, if you use the interpolation electronic zoom, etc.) which you'll need to adjust after the reset. Let us know what happens. I'm moving this thread to where more VLux 114 users will be likely to see it. Quote Link to post Share on other sites More sharing options...
albert Posted June 15, 2018 Author Share #4 Posted June 15, 2018 So far, no go. Thank you Stuart. Quote Link to post Share on other sites More sharing options...
stuny Posted June 15, 2018 Share #5 Posted June 15, 2018 You might want to try calling Leica in NJ to speak with them about this. Perhaps they can shed some light on the issue. (800) 222-0118 Quote Link to post Share on other sites More sharing options...
fotografr Posted June 16, 2018 Share #6 Posted June 16, 2018 I'm sorry I can't offer any help. I would have suggested what Stuart already did about resetting. I'll try some different settings on mine to see if I can duplicate your experience. Quote Link to post Share on other sites More sharing options...
david strachan Posted June 16, 2018 Share #7 Posted June 16, 2018 Advertisement (gone after registration) Hi Al I'll fiddle with mine too . Just to be clear you are on small focus area? ... Quote Link to post Share on other sites More sharing options...
Jim-St Posted June 16, 2018 Share #8 Posted June 16, 2018 The LX100 certainly has an option (Custom menu, p.2) to switch on/off Half Press Release. The menus will be different on the VLUX, of course, but you should find something in there, I'd have thought Jim Quote Link to post Share on other sites More sharing options...
Jim-St Posted June 16, 2018 Share #9 Posted June 16, 2018 Drat! Just realised I've mixed up my DLUX and VLUX. Please ignore last post... Jim Quote Link to post Share on other sites More sharing options...
fotografr Posted June 16, 2018 Share #10 Posted June 16, 2018 Hi Al, I've played around with mine and have just a couple of things for you to check. I'm not sure these settings need to be this way to have the focus hold when the shutter is pressed half way down, but try them and see what happens. (Photos below) You also might see if changing from Pinpoint focus to 1-Area focus to see if you have the problem with both settings. In answer to your question about buying a Q, my recommendation would be to consider the CL with the 18-56mm lens. The image quality is superb and with the zoom lens it is far more versatile than the Q. I sold my Q right after buying the CL/18-56mm combo. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Quote Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/285591-help-me-pls-stuart-brent-and-bill/?do=findComment&comment=3538604'>More sharing options...
fotografr Posted June 16, 2018 Share #11 Posted June 16, 2018 One more setting for you to check. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Quote Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/285591-help-me-pls-stuart-brent-and-bill/?do=findComment&comment=3538612'>More sharing options...
albert Posted June 17, 2018 Author Share #12 Posted June 17, 2018 Thanx everyone.Brent: no go, I thought you hit the jackpot but problem persists. I’ll call Leica tomorrow. I’m at the cabin and am getting some good shots despite the problem. Checking on CL now, hiding my curiosity from THE CFO. Quote Link to post Share on other sites More sharing options...
fotografr Posted June 17, 2018 Share #13 Posted June 17, 2018 Thanx everyone.Brent: no go, I thought you hit the jackpot but problem persists. I’ll call Leica tomorrow. I’m at the cabin and am getting some good shots despite the problem. Checking on CL now, hiding my curiosity from THE CFO. Well, today is Fathers Day. Maybe you could use that to your advantage. Quote Link to post Share on other sites More sharing options...
North / Northwest Posted June 17, 2018 Share #14 Posted June 17, 2018 Hello Brent, Sorry to be late reading this thread. I've not had any problems with my VL114. I just checked and I get focus lock with the button pressed half way. It seems everyone has given you good advise. I think Stuart had the best idea doing a complete reset. Quote Link to post Share on other sites More sharing options...
albert Posted June 18, 2018 Author Share #15 Posted June 18, 2018 Northwest Bill, It’s me, Al from MN, with the problem. So far, no luck. Quote Link to post Share on other sites More sharing options...
North / Northwest Posted June 18, 2018 Share #16 Posted June 18, 2018 Sorry about the name mixup. It looks like you will need to contact Leica with this problem. Hopefully they will have a simple fix for you. Quote Link to post Share on other sites More sharing options...
dkCambridgeshire Posted June 30, 2018 Share #17 Posted June 30, 2018 (edited) Is the zoom control working smoothly i.e. not hesitantly? If it's not as smooth as when new, could be indicative of soiled contacts which might also affect shutter release. https://www.l-camera-forum.com/topic/284600-d-lux-109-…-stickyhesitant-zoom-control/?p=3518809 … remedied with SERVISOL which when applied very sparingly does no harm dunk Edited June 30, 2018 by dkCambridgeshire Quote Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.