Jump to content
  1. paddycook

    paddycook

  2. m_k_s

    m_k_s

  3. hkgmatt

    hkgmatt

  4. lx1713

    lx1713

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By calidre
      I currently have an MP (240) and a 35 summilux.  I was at the leica store today and the employee mentioned when I decide to upgrade my camera I should look at the M10 or SL.  He then said the SL was probably best because of cost and proceeded to show me a sample of the SL with 35 lux (with adapter) The focusing was great to me but did feel bulky. 
      My question is - If I'm really just going to use it with my M lens does it make sense to go SL route?  I know it would be alot cheaper; but not sure on performance difference etc.
      Apologies if this was asked previously in another post and thank you for any response.
    • By Shimo
      The Calonox View usb-c port supports charging and the transfer of data (pictures, videos).
      It works with usb-c to usb-a cables with chargers or computers which have an usb-a port.
      However, the port does not work with an usb-c to usb-c cable. I tested multiple cables and
      different chargers and computers. Always the same negative outcome.
      The Calonox View device comes with an strange usb-c to usb-a/video-chinch splitter cable.
      This cable works - but obviously for charging and data transfer per usb-a only.
      I can't find the reason for this unfortunate limitation - especially considering that
      usb-c shall replace usb-a ports.
      Has someone a solution?
      Also, I can't figure out how to update the Calonox View firmware - nor did I find any
      information regarding firmwares for this device on Leica's pages. In my case, the
      installed firmware is v5.0 but I'm wondering how Leica want's to maintain such a
      high-end device without software updates? Has anybody a solutionn to this problem?
       

      Hello guest! Please register or sign in to view the hidden content. Hallo Gast! Du willst die Bilder sehen? Einfach registrieren oder anmelden!
    • By Shimo
      Das Calonox View har eine USB-C Schnittstelle zum Laden des Akkus als auch zum Übertragen von Daten (Fotos). Verwendet man eine USB-C zu USB-A Kabel funktioniert die Schnittstelle auch sowohl am Rechner als auch mit verschiedenen Ladegeräten. Verwendet man allerdings ein USB-C zu USB-C Kabel, funktioniert die Schnittstelle nicht. Ich habe sowohl verschiedene Kabel, als auch verschiedene Netzteile und Rechner ausprobiert. Die Firmware auf dem Calonox View ist 5.0. Ich habe bisher keine Möglichkeit gefunden, wie man die Firmware aktualisieren kann, noch habe ich bei Leica eine neuere Firmware gefunden - was nachvollziehbar ist, da das Gerät ja neu auf dem Markt ist. Hat jemand bzgl. der USB-C Schnittstelle ähnliche Erfahrungen gemacht? Weiss jemand wie man die Firmware aktualisieren kann?
      Ansonsten aber eine super Wärmebildkamera. Die Qualität ist wirklich Leica typisch super.
       

      Hello guest! Please register or sign in to view the hidden content. Hallo Gast! Du willst die Bilder sehen? Einfach registrieren oder anmelden!
    • By piran
      The manual focus' Magnification setting (x3 x6) does not specifically appear in the main menu. Whereas it can be optioned indirectly by defining Magnification in the Fn or the thumbwheel programmable areas. Shortage of firmware memory or missed out accidently?
      [ whilst in the actual manual focus screen ]
      Easiest method is by clicking the virtual joystick centre button to toggle through x3 & x6 (EVF or LCD). Quite why the top right icon stuff shows or declares [SET] seems pointless. The virtual joystick arrow buttons also directly steer the particular view being magnified (EVF or LCD). Neat though necessarily quite slow.
    • By snapshot1
      I’m using my SL with a 90mm lens and a studio strobe setup to photograph some still life’s.  As I need a f16 aperture I cannot see through the view finder as its so dark. Is there a setting for a bright view finder that will then stop down as the strobe is fired?  Cheers Stephen 
×
×
  • Create New...