Jump to content
ymc226

Auto lens detection not working.

Recommended Posts

The net problem in my case is a stuck lens release which is leading to over-rotation, six bit recognition and focus issues. Those M mounts a lot more intolerant to misalignment than you might think.

 

William

Share this post


Link to post
Share on other sites

In my case my M10 does not detect my Elmarit 24 ASPH. The lens is not over-rotated on the M10, the coding is clean, it is properly detected on my Monochrom I, and was properly detected on my M240 when I had it.

 

So my question is does anyone have the same problem, or have an M10 that properly detects the Elmarit 24 ASPH?

Share this post


Link to post
Share on other sites

Thank you Pico.  I use LR6 for processing all of my photos and regularly apply LR's lens correction for the specific lens.  I just wonder if any lens correction done in camera using the wrong profile can be overridden by the profile used by Adobe in LR.  If not, then I would disable the auto detect function of the M10 for the problematic lenses, if I remember.  I would have to guess this would be more important for the 24 Elmar than for the 35 Summicron.

As far as I am aware, LR does not override any in-camera corrections. This is applied before the data are written to DNG. This is in contrast to the Q which carries the corrections in a separate file embedded in the DNG

Share this post


Link to post
Share on other sites

Mine detects the 24 3.8 ASPH 100% of the time. Never seen an issue with any firmware release. So it’s not firmware.

 

In my case my M10 does not detect my Elmarit 24 ASPH. The lens is not over-rotated on the M10, the coding is clean, it is properly detected on my Monochrom I, and was properly detected on my M240 when I had it.

 

So my question is does anyone have the same problem, or have an M10 that properly detects the Elmarit 24 ASPH?

Share this post


Link to post
Share on other sites

Mine detects the 24 3.8 ASPH 100% of the time. Never seen an issue with any firmware release. So it’s not firmware.

 

 

Mine is the 24 2.8 Elmarit ASPH which is a different code from the 3.8. Anyone has that on the M10?

Share this post


Link to post
Share on other sites

Mine is the 24 2.8 Elmarit ASPH which is a different code from the 3.8. Anyone has that on the M10?

 

Yes - just mounted and unmounted it a few times on the M10. Always immediately detected.

Share this post


Link to post
Share on other sites

Yes - just mounted and unmounted it a few times on the M10. Always immediately detected.

Thanks. This is strange. My 24/2.8 works on the 240, Monochrom I, but not on my M10 ???

Share this post


Link to post
Share on other sites

hello, I just bought a used noctilux that I ride on a new Leica M10, and I do not see the coupling box active lens, in auto, and in manual the noctilux is not in the list, the firmware of the device is 1.10.4.0. Thank you in advance for your advice

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×