Csacwp Posted February 3, 2018 Share #1 Posted February 3, 2018 Advertisement (gone after registration) I had an SL and M246... Sold the M246 and now regret it since it rendered so differently with Mandler lenses. Now I'm considering either getting another M246 or an M10. Has anybody compared these two bodies with older lenses? Has the M10 bridged the gap with improved b&w conversions over the M240 and SL? Quote Link to post Share on other sites More sharing options...
Advertisement Posted February 3, 2018 Posted February 3, 2018 Hi Csacwp, Take a look here M246 vs M10. I'm sure you'll find what you were looking for!
mmradman Posted February 4, 2018 Share #2 Posted February 4, 2018 I also have SL and M246,must admit very impressed with B&W conversion from SL, but again it may be linked to the subject and lens used. If I was you I would wait for M10M unless you must have Monochrom Camera now. Quote Link to post Share on other sites More sharing options...
Jager Posted February 4, 2018 Share #3 Posted February 4, 2018 (edited) Has anybody compared these two bodies with older lenses? Has the M10 bridged the gap with improved b&w conversions over the M240 and SL? If by 'compare' you mean some sort of formal test between them... no. I own both the M10 and the M246. But I don't do tests. I just shoot 'em. The M10 makes great B&W conversions. As did (does) the M240. As did (do) the M9 and M8. Are M10 B&W conversions as good as native files from the M246? No. Edited February 4, 2018 by Jager 7 Quote Link to post Share on other sites More sharing options...
johnp1975 Posted March 31, 2018 Share #4 Posted March 31, 2018 I had an SL and M246... Sold the M246 and now regret it since it rendered so differently with Mandler lenses. Now I'm considering either getting another M246 or an M10. Has anybody compared these two bodies with older lenses? Has the M10 bridged the gap with improved b&w conversions over the M240 and SL? I have both the SL and M10. Found they are sufficient for B&W Conversions and the results are just as stunning as the M246. John Quote Link to post Share on other sites More sharing options...
relms Posted April 2, 2018 Share #5 Posted April 2, 2018 (edited) I own an SL, an M10, and an M246, and as good as the files are when converted from SL or M10, they don't quite measure up to the M246's files. Perhaps it is possible to get the same look from the SL or M10 in post processing, but so far I have not been able to achieve it. M246 + APO Summicron-M 50, 1/90 @ f/3.4, ISO 12,500 Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Sundog Book Store, Seaside, Florida Edited April 2, 2018 by relms 8 Quote Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! Sundog Book Store, Seaside, Florida ' data-webShareUrl='https://www.l-camera-forum.com/topic/281485-m246-vs-m10/?do=findComment&comment=3492444'>More sharing options...
Jon Warwick Posted April 10, 2018 Share #6 Posted April 10, 2018 (edited) I had an SL and M246... Sold the M246 and now regret it since it rendered so differently with Mandler lenses. Now I'm considering either getting another M246 or an M10. Has anybody compared these two bodies with older lenses? Has the M10 bridged the gap with improved b&w conversions over the M240 and SL?I remain constantly amazed at the higher resolution and especially higher pixel acuity (ie, no blur from a bayer filter) and lack of digital aberrations from either of the Monochroms when they are compared to M240 / M10. If you don’t print really large, then the benefits might be much more subtle. So answers here could vary based on that matter alone. I print very large (40-50”+) and I also use the M 50 APO, where that lens’ higher resolution is much more apparent on the M246 than it is on my M240. Those factors mean (for my workflow) that I see a very large difference between the M246 and any of the Leica 24mp colour cameras for resolution / pixel acuity / tonality. Edited April 10, 2018 by Jon Warwick 2 Quote Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.