Can the 40mm Summicron be fitted to the M10 without any filing ?

[pebbles]

Advertisement (gone after registration)

I like this lens a lot and used it on my M6. Can anyone kindly let me know if it can be used on the M10 without serious modification.

[UliWer]

Here is a thread about the 40mm Summicron and the M9 - same for the M10 (besides you could use the EVF to get the right frame of view, though I would think this is not sooo important)

 

http://www.l-camera-forum.com/topic/267190-40mm-summicron-ad-m9/

[Advertisement]

The Leica Q3 is available for pre-order at B&H Photo Video and Adorama

[pebbles]

Thanks Uliwer. i posed the same question when I was lent an M9 - which I didn't like - it was so fat compared with my M6. it worked fine save that the frame lines weren't correct but I could work around that without a problem. When i get an M10 i will certainly use it.

[Frankie]

Years ago, I did file down the claw of a CV 40/1.4 to bring up the 35mm frame-lines.

 

Ground glass on film plane examination indicates the 35mm frame-line is a near 100% FoV for the 40mm FL...the way I prefer.

 

With digital, the equivalent test is easy...just compare the VF frame-line to a "live view".

[jmahto]

It works on my M240 therefore I can't imagine why it won't work on M10.

 

The filing of tab is unnecessary if you are ok with 50mm frame-lines. I also worked out the six-bit coding for this lens (it is difficult since a flange screw is in the way) and posted in the past. If you do a search then you may find it.

 

All I will say is that it is very underappreciated lens and hugely important to me. Now I use this lens to stitch three vertical frames giving me equivalent of 28mm FOV and 50mp sensor. The result beats the pants off my summicron 28mm shot in resolution. A huge benefit if you want to print your landscapes really large.