Jump to content

SD cards choice?


rafikiphoto

Recommended Posts

Same question here...

 

According to SL specs:   Card Slot 1 (UHS-II) is max writing speed of 100MB/s   and Card Slot 2 (UHS-I) is max writing speed of 30MB/s.

 

Normally i would have gone with two of the  Lexar Professional 2000x   (up to 300MB/s) but now i am wondering if i can save the money because

the camera only supports max 100MB/s.

 

Is that right or did i miss something here?

Link to post
Share on other sites

I bought the Lexar Professional 1000X/150MB/s in 64 and 128GB (2 of each). Amazon is offering a great deal on those at the moment. These cards are UHS II and U3. Seem to work flawlessly on the SL, as long as you format in SD Formatter first prior to formatting in camera. 4K video and DNG+JPEG burst mode work perfectly on those cards, so I would guess they are fast enough. They are a lot cheaper than the 2000X Lexar or the SanDisk 280MB/s cards. 

 

Wilson

  • Like 1
Link to post
Share on other sites

I have two of the Lexar Professional 128G cards that Wilson mentioned and two of the Sandisk Extreme Pro 64G, 95Mbps cards. They have all operated flawlessly, and seemingly without any difference between them although the Sandisk's are rated a bit slower. They're all I've used with the SL so I can't say if they're better or worse than others. 

  • Like 1
Link to post
Share on other sites

Advertisement (gone after registration)

By the way, my reason for wanting two of the faster cards was primarily for the faster read speeds when I transfer to the computer, even though the camera can not max out either card in write speed.

 

 

The max speeds are just theoretical. So they are no good reason for a decision.

Typically the highest speed is needed for 4k films. If you are not filming the speed is not extremely important.

Past experiences:

I had good "speed" with 2x Lexar 1000x 64 GB UHS-II . I never had the need for the faster (2000x) cards.

Even 2x Kingston 128 GB UHS-I cards (45 MB/s) were fast enough for taking pictures, but slightly slower.

Mixing the cards is not recommended.

 

Check if your computer supports UHS-II cards at "full speed". If not, then all cards are equal and UHS-I is good enough.

Edited by steppenw0lf
  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...