derphilipp Posted December 7, 2015 Share #1 Posted December 7, 2015 Advertisement (gone after registration) During my last couple of trips in colder temperatures I've noticed that once temperatures get slightly cold the light meter of my M6 gets fairly unreliable. Meaning that the little arrows either don't show up at all, are barely visible or simply give me wrong meterings. I'm assuming it has something to do with the cold draining the batteries. But the temperatures I was in weren't exactly "freezing" - mostly between 0 and 15 Celcius (32 and 59 Fahrenheit) - so I'm not sure. Is this a common issue? Is there a simple fix? Maybe a battery thats more resistant to cold temperatures? Any help would be appreciated! Quote Link to post Share on other sites More sharing options...
Advertisement Posted December 7, 2015 Posted December 7, 2015 Hi derphilipp, Take a look here Leica M6 Light Meter in cold temperatures. I'm sure you'll find what you were looking for!
a.noctilux Posted December 7, 2015 Share #2 Posted December 7, 2015 Are those alcaline batteries ? Silver oxyde or lithium batteries are more reliable, if you can choose from. The best that I use with my M6 is lithium 3V battery that has two advantages: one contact less than two 1.5V and abrupt drop of voltage. Take care also to clean contacts with every battery replacement. Arnaud Quote Link to post Share on other sites More sharing options...
Michael Geschlecht Posted December 7, 2015 Share #3 Posted December 7, 2015 (edited) Hello Philipp, Welcome to the Forum. Please keep in mind that as most types of batteries lose their charge they become less efficient as the temperatures get colder. How fresh are your batteries? Best Regards, Michael Edited December 7, 2015 by Michael Geschlecht Quote Link to post Share on other sites More sharing options...
Trivette Posted December 7, 2015 Share #4 Posted December 7, 2015 Lithium batteries work quite well in sub-freezing temperatures. Quote Link to post Share on other sites More sharing options...
menos I M6 Posted December 10, 2015 Share #5 Posted December 10, 2015 A healthy M6 with fresh batteries (good quality Li batteries are best) should work perfectly reliable in cold temperatures. I have a '96 M6 classic - still with the "older" meter type and it works flawlessly in temperatures ~0º. Try switching to a good set of batteries, if that doesn't help, have the meter of the M6 checked. Quote Link to post Share on other sites More sharing options...
robert blu Posted December 20, 2015 Share #6 Posted December 20, 2015 I do not own an M6 but on my M7 never had problems in that range of temperature (I like snowshoes walking). Of course when planning to use it cold environment (down to -5 / -10 °C) always put fresh batteries in the camera. robert 1 Quote Link to post Share on other sites More sharing options...
derphilipp Posted December 20, 2015 Author Share #7 Posted December 20, 2015 Advertisement (gone after registration) Thanks everybody for the help. Maybe my batteries really weren't fresh enough anymore as I very rarely but new ones in. I will remember that next time Quote Link to post Share on other sites More sharing options...
ShivaYash Posted December 21, 2015 Share #8 Posted December 21, 2015 I've just loaded up with Energizer made in USA cells. All sweet. Quote Link to post Share on other sites More sharing options...
Chuck Albertson Posted December 24, 2015 Share #9 Posted December 24, 2015 (edited) A 3V lithium cell works well in the cold, or two 1.5V silver oxide cells. The MP has an "idiot light" that turns on when your batt is just about gone. It's a good idea for lithium batts, as they don't give much warning that they're out of juice; their discharge graphs show them putting out steady voltage, and then it just drops, like a marble rolling off a table. Alkalines (like the A76) will fade in even moderate temperatures. Edited December 24, 2015 by Chuck Albertson Quote Link to post Share on other sites More sharing options...
deardorff8x10 Posted December 24, 2015 Share #10 Posted December 24, 2015 (edited) When I shot my m6 in 0 to -20c temps, the meter would go out after 60 minutes or so (depending on temps), even with fresh batteries. I found it better to keep it next to my body under a jacket and just pull the camera out when needed. If you have problems above 5c or so, I would get a new battery, as others seem to have noted. Edited December 24, 2015 by deardorff8x10 Quote Link to post Share on other sites More sharing options...
ThePioneer Posted January 7, 2016 Share #11 Posted January 7, 2016 Just take the batteries out and use your handheld. 2 Quote Link to post Share on other sites More sharing options...
antigallican Posted January 15, 2016 Share #12 Posted January 15, 2016 Mamiya 7ii used to offer a remote battery holder for cold weather so you could keep the power supply inside your coat. I would try doing that with the Leica - another advantage of the m6 is that you can get it under your coat. Quote Link to post Share on other sites More sharing options...
derphilipp Posted January 15, 2016 Author Share #13 Posted January 15, 2016 Thanks everybody again. some solid advice I'll remember to always use fresh batteries in such conditions from now on. I will probably also get a handheld lightmeter as a backup. I have one on my phone but its really annying to use. Any recommendations on affordable handhelds for that purpose? Quote Link to post Share on other sites More sharing options...
Fotoklaus Posted January 15, 2016 Share #14 Posted January 15, 2016 Gossen Digisix. The most used meter of my equipment. Precise, lightweight, small. Measuring of incident and reflected light possible. Wide range from 0 - 18 EV, clock, timer, ... Quote Link to post Share on other sites More sharing options...
Matlock Posted January 15, 2016 Share #15 Posted January 15, 2016 +1 Quote Link to post Share on other sites More sharing options...
rpavich Posted January 18, 2016 Share #16 Posted January 18, 2016 Thanks everybody again. some solid advice I'll remember to always use fresh batteries in such conditions from now on. I will probably also get a handheld lightmeter as a backup. I have one on my phone but its really annying to use. Any recommendations on affordable handhelds for that purpose? Sekonic L308 Quote Link to post Share on other sites More sharing options...
Borna Posted January 7 Share #17 Posted January 7 Bumping this thread. I went out with a friend today for a session. It is minus -13-15 celcius in the Nordics. (I think 8ish fahrenheit?) My friend uses a handheld sekonic with his M4-2 and I use my internal metering system with the M6 Classic. In the beginning everything was fine, he said sometimes "here I have to use 1/250 + f5.8 and so on, and my M6 internal metering matched it well. Later on, lets say 1,5-2 hours outside when it got bit darker but not much, my camera would say 1/125 + f8, his metering on same spot/area would say 1/60 f4. I tried to google and seek information regarding this but could not find anything, if this is a common issue when its much colder than normal. Both used Ilford Hp5 at ASA/ISO 400. Any advise? Quote Link to post Share on other sites More sharing options...
Borna Posted January 7 Share #18 Posted January 7 And oh, I am using quite fresh (3 months, 10 rolls in, VARTA CR1/3N battery) Quote Link to post Share on other sites More sharing options...
Borna Posted January 10 Share #19 Posted January 10 I guess nobody experiened this before? Quote Link to post Share on other sites More sharing options...
TomB_tx Posted January 10 Share #20 Posted January 10 51 minutes ago, Borna said: I guess nobody experiened this before? Most of us are too old to go out in the cold - even in Texas. But back in the 1960s I did photography in upper Michigan in the winter, and my camera worked perfectly at night in -25 F snowy weather. (Oh, but none of my cameras then had a meter...) 1 Quote Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.