leepoe Posted May 14, 2015 Share #1 Posted May 14, 2015 Advertisement (gone after registration) Does anyone know of some better instructions than the user manual on setting up WIFI? I am going nuts trying to do this. 1 Quote Link to post Share on other sites More sharing options...
Advertisement Posted May 14, 2015 Posted May 14, 2015 Hi leepoe, Take a look here D-Lux 109-WIFI set up. I'm sure you'll find what you were looking for!
pop Posted May 14, 2015 Share #2 Posted May 14, 2015 Are you trying to connect your camera to your smart phone and if so, which kind of phone? In any event, there seem to be three ways to set up that connection: The camera displays a two-dimensional "bar code" which is read by the app in your phone with the built-in camera You use the "traditional" way by entering an SSID code in your phone You use the "NFC" method by holding the phone very close to the camera. Which one shall it be? Quote Link to post Share on other sites More sharing options...
aaulbach Posted May 18, 2015 Share #3 Posted May 18, 2015 I have a fourth method: ask a Grandkid for help! 1 Quote Link to post Share on other sites More sharing options...
heartsforme Posted March 5, 2016 Share #4 Posted March 5, 2016 I am stuck in trying to enter the password for the wifi. I can't get to my alpha keyboard even after closely following the instructions. Any help out there? Quote Link to post Share on other sites More sharing options...
chicalc Posted May 19, 2016 Share #5 Posted May 19, 2016 this procedure works for me, using wifi direct first, download and install leica C image shuttle in you mobile -turn on wifi on the D lux -choose "new connection" -choose "send images stored in the camera" -choose "direct" -choose"wifi direct" -access wifi direct on your mobile, make sure it is "discoverable" -back to the camera, choose your mobile's wifi -a pop menu request will show in you mobile device (connection access from the D lux) -choose "connect" on the mobile -on the mobile, turn on the leica app -back to the camera just press menu set twice -choose either "single" or "multi transfer" that's it. yes it is a lengthy procedure. but easy to get used to. 1 Quote Link to post Share on other sites More sharing options...
Fang Posted May 20, 2016 Share #6 Posted May 20, 2016 Sorry I'm still struggling with all 3 methods. Is there an Idiots Guide to these?... Thanks in advance Are you trying to connect your camera to your smart phone and if so, which kind of phone? In any event, there seem to be three ways to set up that connection: The camera displays a two-dimensional "bar code" which is read by the app in your phone with the built-in camera You use the "traditional" way by entering an SSID code in your phone You use the "NFC" method by holding the phone very close to the camera. Which one shall it be? Quote Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.