Jump to content

Soft cases for 240?


Recommended Posts

Advertisement (gone after registration)

Got the idea in my head I need a "soft case" for days when I want to throw my camera in my every day backpack. I prefer not to remove all my EDC items from the backpack and carry my camera bag. I figured the camera could use a little protection from the tupperware and misc EDC items I bring to work.

 

Yes, I'll research and google but hoping to get user experience and feedback for more thorough answers. TIA!

 

EDIT: I should clarify. I was at Camera West in Walnut Creek and saw some nice "soft pouches" from Op/Tech USA: http://optechusa.com/soft-pouch-digital-d-series.html. Anyone use them for their 240? If so, which size?

Edited by Bob Tilton
Link to post
Share on other sites

Hi.

 

I have a Arte di Mano half case on my M240, which I then cover with the

 

Leica Neoprene Case with Short Front 14867 for camoflage.

 

I like this neoprene case as it easily rolls up and stuffs into my pocket, when i'm shooting

Link to post
Share on other sites

I can't see any difference other than the embossed logo between Leica's neoprene case and Optech ofr Zing neoprene cases costing a fraction. They do work nicely and are water repellent. Then again for the OP's purpose so would bubblewrap and a couple rubberbands.

 

I have a couple old Benser cases which I never cared for to use as they were designed, but as a travel wrap they do offer some protection albeit not as much against impact as neoprene.

Link to post
Share on other sites

Advertisement (gone after registration)

All three seem nice. I still use Benser bags which zipper around body with smaller lens like 35. When not used can be stuck in pocket as take up little room.

 

Guess depends on how large one prefers a bag and how much protection.

 

Hey mr bocaburger, any interest in selling your old Bensers?

Link to post
Share on other sites

I also ended up using the wraps to store the lenses in my pelican case ( keeps them banging into each other) I used to use the leather cases that came with the lenses but got paranoid after reading too many horror stories about fungus on the forum. The small ones work well for most lenses, the bigger sizes can take a body and lens which you can then throw into your travel bag or whatever.

Link to post
Share on other sites

Does the leather have an effect on fungal growth or is it a matter of keeping the lense in the dark without any air circulation (in which case any container would be just as bad)?

 

 

I have heard varying things on this topic.

I keep everything in Pelican cases when I am not using it with large silica gel packs which I recharge periodically. Since it wasn't a problem to remove the leather I thought why risk it and removed it all . And replaced with the wraps.I have no better solution for storing all my gear.

I should note that I had a Nikon lens in a similar leather case to leica for over 20 years stored in a pelican, did not use it in 20 years, have now sold it, and there was no fungus or damage. ( sold all my Nikon kit)

Link to post
Share on other sites

I use large plastic storage bins of the kind with hinged lids, not that seal tightly, and inside is a pint-sized plastic tub with a perforated basket insert, in which are placed flakes of a product called Damp-Rid. They absorb moisture and the water collects in the bottom of the tub. Every month or so I empty the water and add more flakes. The boxes are in a closet with a louvered door, and the A/C is always on in the house. This has worked for over 20 years with no fungus. Probably the Damp Rid is overkill, the A/C is probably enough to keep the humidity below the threshold for fungal growth, but hey, belt and suspenders :p

Link to post
Share on other sites

I have no AC unfortunately because the idiot who owned the house before me ripped out the perfectly good forced air heating system and installed a hot water radiant underfloor system which does not work, because these types of systems only work properly when you have a concrete topping to provide thermal mass. To put in AC would involve mounting remote condensers on the roof, ducting through the attic and cutting holes in all my ceilings plus building bulkheads in certain areas. Too much $$ and disruption. So in summer we fry, and in winter we freeze. Fortunately it never gets too humid here so at least the cameras are safe.

Link to post
Share on other sites

I have an old Original Benser leather case. It has character. :)

 

If I didn't I would use a neoprene case. But mostly my M body goes into a compartment in a Hadley Pro (I have both large and small) which is protection enough. I do try to avoid a jumble or pile of cameras and lenses in a bag.

Link to post
Share on other sites

I have no AC unfortunately because the idiot who owned the house before me ripped out the perfectly good forced air heating system and installed a hot water radiant underfloor system which does not work, because these types of systems only work properly when you have a concrete topping to provide thermal mass. To put in AC would involve mounting remote condensers on the roof, ducting through the attic and cutting holes in all my ceilings plus building bulkheads in certain areas. Too much $$ and disruption. So in summer we fry, and in winter we freeze. Fortunately it never gets too humid here so at least the cameras are safe.

 

5000btu window-mount A/C units are enough to cool a decent-sized room and will run you $100-150 each and the latest ones are quiet and also stingy with electricity compared to even a decade ago.

Link to post
Share on other sites

5000btu window-mount A/C units are enough to cool a decent-sized room and will run you $100-150 each and the latest ones are quiet and also stingy with electricity compared to even a decade ago.

 

 

Yes I have looked at them at Home Depot, however we haven't quite been able to reconcile ourselves to the appearance of them. They are not the most attractive of objects, and we have spent years getting the aesthetics of our house to where we wanted it. What I should have done is installed permanent AC when we renovated the upstairs ceilings ( to remove the "texture") and re insulated the attic in 2009. Now that We have done all that drywall work I don't want to rip it apart again.

Link to post
Share on other sites

  • 11 months later...

Sorry for reviving an old thread, but I'm interested in the Neoprene case M with long front for my M 240 and MATE. Does anyone use this case with the grip?  It looks like the case would be fine, but it would be good to confirm it.

 

Thanks

 

 

Mark

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...