native thread size for LEICA X1 X2?

[MJSfoto1956]

Advertisement (gone after registration)

Can anyone tell me what the native (i.e. body side) male thread is for the LEICA X1 X2? Is it 49mm? Or is it some "special" thread?

 

Thanks!

Michael

 

P.S. I am aware that the available adapters provide 49mm female thread, but that is not the question I am asking.

[MJSfoto1956]

anybody?

[Advertisement]

The Leica Q3 is available for pre-order at B&H Photo Video and Adorama

[rickp13]

i don't use a filter on my X1, but did add an after-market lens cap which opens automatically when the power is switched on. quite handy, and can't be lost.

 

i've seen an adapter tube for the X1 which accepts filters and may function as a lens shade. have a look at amazon.com for this one from JJC:

 

Professional Metal Lens Hood & 49mm Adapter Tube For Leica X1 and X2 Cameras

 

 

 

there may be others.

 

good luck

 

rick

[elgenper]

Well, I don´t have the instruments to measure accurately enough, but if it´s of any help, it is exactly the same thread at the one for the original lens shade for the Summarit 75 and 90 (old f/2.5 version). And a 49 mm accessory doesn´t fit in that thread, it is slightly bigger than 49 mm. I´d say it is 50 mm or so.

[MJSfoto1956]

Well, I don´t have the instruments to measure accurately enough, but if it´s of any help, it is exactly the same thread at the one for the original lens shade for the Summarit 75 and 90 (old f/2.5 version). And a 49 mm accessory doesn´t fit in that thread, it is slightly bigger than 49 mm. I´d say it is 50 mm or so.

 

As I suspected (typical for manufacturers btw). Thanks so much!!

 

Michael

https://www.flickr.com/photos/mjsfoto1956/

[wda]

Current thread suggests that Leica didn't plan for the addition of filters. Given the retracting lens design, that isn't surprising. It is interesting to note that Leica changed its mind with the latest model in the X-range and incorporates a self-opening lens cap. That is very practical. I have used the JJC device for several years. It is a simple and effective solution but does not have the security against front damage if handled without due care and attention. Compromises.

 

Constantly refitting filters would be irritating to most users but I can see the benefit for occasional specialist filtering.

[Trivette]

Advertisement (gone after registration)

Whatever the thread size is, I got this tube, and it fits perfectly.

[rivi1969]

I have the X1 and there is no filter thread for it. You can add a tube ) I have one but never use it since looks pretty ugly). regards, Ricardo

[wda]

And impractical for everyday compact photography.