ernst_leitz Posted October 24, 2013 Share #1  Posted October 24, 2013 Advertisement (gone after registration) Is there anyone in this forum who can shed any light onto what this lens hood (bottom) might be (barrel measure is 17 mm) and what lens(es) it's for. I can't find any info "anywhere". The "proper" ITOOY has a taller barrel. Image from Leica Camera Forum Wiki (top) Thank you for any replies. Regards ernst Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/215271-lenshood-question/?do=findComment&comment=2449275'>More sharing options...
Advertisement Posted October 24, 2013 Posted October 24, 2013 Hi ernst_leitz, Take a look here Lenshood question. I'm sure you'll find what you were looking for!
UliWer Posted October 24, 2013 Share #2 Â Posted October 24, 2013 It's interesting. I am not sure about the 17mm you gave for the "barrel": does this include the chome base, or only the black part? The black part of the ITOOY with broad chrome ring measures about 17mm. The black part of ITOOY with small chrome band measures 27mm. So it could be a rare mixture between both versions of the ITOOY: small chrome band but also short black part. Â Can you tell on which lens it fits? The ITOOY was for the later version of the 50mm Elmar with M-bayonet and 39mm-filters. If your lenshood fits this later version, it could support my assumption of an early (or intermediate?) ITOOY-version Link to post Share on other sites More sharing options...
gyoung Posted October 24, 2013 Share #3  Posted October 24, 2013 I am pretty sure the black hood parts unscrew from the chrome mount on all these (I have several, in use including ITOOY and 12585, 12575) so it would be possible to produce all manner of interesting combinations!  Gerry  Sent from my GT-I9505 using Tapatalk Link to post Share on other sites More sharing options...
ernst_leitz Posted October 24, 2013 Author Share #4 Â Posted October 24, 2013 The hood came with an old screw 50 mm Summicron that I bought years ago. It is the black part that is 17 mm (which I don't seem to be able to unscrew as with the ITOOY). Total with chrome part is 22 mm. The fitting is A 42 and cannot be mounted reversely as the later ITOOY (which btw black part measures roughly 18,5 mm and total with chrome part 29 mm. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.