JKphotography Posted September 17, 2011 Share #1 Posted September 17, 2011 Advertisement (gone after registration) Hi there! Yesterday i was at a wedding, i mounted the hood on my Elmarit 28mm and suddenly the complete front of the lens started turning Even the ring on the front with the text on it turned. Don't know if it's a big problem or not (doesn't affect the image quality). But maybe there is a loose screw or something? Any ideas? Cheers JK Quote Link to post Share on other sites More sharing options...
Advertisement Posted September 17, 2011 Posted September 17, 2011 Hi JKphotography, Take a look here Leica Elmarit 28mm f2.8 ASPH problem. I'm sure you'll find what you were looking for!
jippiejee Posted September 17, 2011 Share #2 Posted September 17, 2011 I have that same lens and just sent it off to Solms this week for repair after my lens head front element started to wobble as well. I just got the repair estimate today where they said they'd fix the front element and adjust all the parts. Good to see it'll be done for free as covered by the warrenty. Quote Link to post Share on other sites More sharing options...
adan Posted September 17, 2011 Share #3 Posted September 17, 2011 Basically, all the glass, and the aperture ring, are a unit that screws into the focus ring. There is supposed to be a lock on the threads, but it comes loose sometimes. Also true for the 35 f/2 ASPH and pre-ASPH - and we have a customer's 35 Summilux ASPH in to Leica for a similar problem. Because the glass is a unit, this won't affect the optical design (spacing between glass bits) and thus image quality directly. But it can affect the focus, since if the glass is forward of the correct position, the rangefinder is no longer accurately representing the actual location of the image plane. What usually brings this on is using the rectangular clip-on lens shades as a grip when unmounting the lens. It is a very tempting handle - but applies torque to the front of the lens instead of directly to the lens mount. Which will eventually break the locking glue. I've had a couple of 35 pre-ASPH lenses with unscrewable front parts, and lived with them for years with no focus problem, by simply training myself to reach OVER the shade and grip the back of the lens for mounting and unmounting. 1 Quote Link to post Share on other sites More sharing options...
lct Posted September 17, 2011 Share #4 Posted September 17, 2011 Basically, all the glass, and the aperture ring, are a unit that screws into the focus ring. There is supposed to be a lock on the threads, but it comes loose sometimes. Also true for the 35 f/2 ASPH and pre-ASPH... +1 Not sure if there is a lock though. I would not worry too much as my 35/2 IV has been doing this for 30+ years with no focusing problems so far. Better refrain from using hoods to mount / unmount lenses BTW. Quote Link to post Share on other sites More sharing options...
Jsalvador74 Posted October 14, 2018 Share #5 Posted October 14, 2018 My 28mm Elmarit ASPH was bought brand new less than 1 year ago in 2017....as of today, the entire aperture ring came off. Btw, this lens has seen action a fee times only and like my other stuff, has been given immaculate care. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Quote Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/162015-leica-elmarit-28mm-f28-asph-problem/?do=findComment&comment=3612415'>More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.