chris_yu Posted January 2, 2007 Share #1 Posted January 2, 2007 Advertisement (gone after registration) I have a Metz 40 MZ-3i with SCA 3502 M4,can this be used on the V-Lux 1 with its TTL flash functions yet without demaging its circuit.Please brighten me. Chris Yu Link to post Share on other sites More sharing options...
Advertisement Posted January 2, 2007 Posted January 2, 2007 Hi chris_yu, Take a look here External TTL flash for V-Lux 1. I'm sure you'll find what you were looking for!
Riley Posted January 2, 2007 Share #2 Posted January 2, 2007 i think so Photo Strobe Trigger Voltages demonstrates the trigger voltage at 4.5V I think the camera can handle 24v but i would check it out with Metz if there are no definative responses here Link to post Share on other sites More sharing options...
Riley Posted January 2, 2007 Share #3 Posted January 2, 2007 oh i forgot i think the Metz would be in AUTO mode you need Olympus or Panasonic flash for V-Lux 1 Link to post Share on other sites More sharing options...
charlz Posted January 7, 2007 Share #4 Posted January 7, 2007 Before getting my V-Lux 1, I owned a Olympus C-8080 with the external FL50 flash unit. I liked both. In selling my Olympus camera, I decided to keep the flash. It works great with the Leica (as it did with the Olympus). I have seen the FL50 unit with other manufacturers' names, notably Panasonic. The FL50, when mounted on the V-Lux performs all the TTL functions seamlessly. It is a strong flash unit. I wouldn't hesitate to buy one. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.