Search the Community
Showing results for tags 'shutterspeed'.
Found 4 results
Hi guys, this is my first post, regarding my first Leica which I bought on Ebay. It was listed as having an issue with 1sec shutter speed being way too fast, which I didn't care much because it is a shutter speed I don't think I am going to use at all. I received the camera, really good cosmetic condition btw, and I noticed that all slow shutter speeds, below 1/30sec were off, way too fast. After googling the problem, I found that that can happen after a long time without being used, and that firing the shutter several times throughout all the shutter speed range might work. So I did it and it worked, for all shutter speeds except 1/8 and 1/30. I compared it side by side with my Canon 7 and they were the same-ish by the naked eye. And now, I have just tried something and if I fire the shutter with the camera upside down, 1/8 sounds ok, halfway between 1/15 and 1/4. And I promise I haven't been drinking or anything 🤨 So, today, I have contacted by email 4 Leica repair shops in the UK. Two of them have replied, one that they cannot do it because they don't have spare parts, and the other that I should return the camera and ask for a refund. So I went to the only Leica repair shop that I know in London, which I am not going to say its name. So, I got there, the guy took the camera, he wasn't listening to what I was saying at first, started firing the shutter and making appreciative faces saying, yes, slow speeds are ok. Until I got him to listen to what I was saying, and then he saw the problem with 1/8 and 1/30. He told me the camera would need servicing (now the finder needed service too because it wasn't a clean view..., but also that they wouldn't probably need any spare parts), which is fine, normal price for a CLA for a Leica. But he also advised I returned the camera to the seller. So I don't really know what to do. The camera has that problem, it looks in good cosmetic condition, and, whatever they say, I been after one of these cameras for like a year, and I have never seen one in this cosmetic condition for less than a grand. And I bought this one for £750. I have asked the seller if they would refund me the cost of the repair, but they haven't said yes, just have asked me to check if I want and let them know. So, what do you guys, as Leica users, think? Just a honest, and blunt if necessary, opinion. Cheers
Hi everyone, I've encounter a strange "bug" with my M2 I took a shot, then cocked the shutter so i would be ready for the next shot, but I didnt fire right away but let it be. When I took the next shot after some times, the shutter speed seems to be slower than the speed indicate in the shutter speed dial I make some test shots at 1/125 and 1/60, cocked the shutter, wait for couple of minute, then click the button. When the m2 fire, i believe it was fired at 1/15 or 1/8 I took one more test at 1/8, wait 3 minutes then fire, the shutter speed then fired at 1/4. The more i'd wait, the slower the speed. For example, 1 minute then it was slowered by 1 speed, 3 minutes for 3 speed... (not exact numbers) I've also tested to change the speed before/after advance the level, and before/after waiting for the next frame. But it seemed that the problem still remained I didn't have any trouble with the machine when clicked the button right after I cocked the shutter, but i really want to be always ready for the next frame. Have anyone encountered the same problem? Is there anyway to fix it?
Hi, the Q2 is my first Leica (sorry 😉 ). Besides the weird Implementation of the much discussed BackButtonFocus I've noticed another strange one, but not sure if it's just me. In all my other cams you simply have a more/less plain, isolated setting: Minimum Shutter-speed. It just takes care the shutter-speed, in whatever (semi-)auto setting you force the camera in, does not go below a defined value, for obvious reasons, most important one: the user does not want it to go below that value, knowing what she/he is doing or anticipating on situations he/she expects. However, with the Q2 you CAN set the min value in the sub-menu AUTO ISO settings (which already is a bit strange) but what happens is that when you set the MIN SHUTTERSPEED, it ONLY works when ISO is set to AUTO. As soon as you decide to kick the ISO setting from AUTO to a specific value(simply because you want to for that shot/series and since I set the thumbweel to that function, its very easy to do so), you loose the min. shutter setting. Is that normal practice at LEICA? The other AUTO-ISO setting: MAX ISO is on the other hand maintained whatever you do (shutter/aperture/exp. correction etc.), so that one works fine i.m.o. Anyway, just curious about opinions and maybe i'm just wrong, for now a bit irritating I cannot set with full confidence a minimum shutter-speed and truly hope it's firmware-fixable. Thanks in advance
Going to New York on the 4th of July. what are best photo viewing areas with the best backgrounds. Also, best iso, shutterspeeeds, lenses. On the SL is there something that i have to program to simulate a cable release? Thanks for everyone's comment!