Search the Community
Showing results for tags 'firmware upgrade'.
-
Hi All My first post !! Having now owned the Leica Q for a few months and in particular liking the minimalist approach I still feel the following are significant areas that require improvement all of which can be dealt with in a firmware update: 1. Spot Metering: Problem This is only at the centre so to be used effectively one has to meter and recompose that can lead to missing the shot Suggested Solution Meter through active autofocus point either manually or in a priority mode Effect of Suggested Firmware Upgrade no recomposition or button push to lock focus necessary. 2. Touch Focus not available if using the EVF Problem when using LCD Screen display touch focus mode is good, just touch or maybe drag the focus point to where you want to focus but if you change over to the EVF you cannot move the focusing point by still dragging on the screen or by the direction pad having to change the mode for the latter. This means that when changing from from touch screen to EVF you have to change the focus mode - which cannot be mapped to the fn button (see 3 below). Thus more rather than less button pushes are needed in this scenario. This is contrary to Leica's minimalist approach.This facility is available in both Panasonic M 4/3 cameras (GX8 which is where I am coming from ) and I understand Olympus although I do not own one. This is odd a Panasonic is in partnership with Leica on the electronics side. Suggested Solution Firmware Update to allow movement of the AF point using touch focus when using EVF as is done on Panasonic Cameras. Effect of Suggested Firmware Upgrade Less button pushes than often required exposure compensation available when in an auto-exposure mode. Less likelihood of missing the shot. 3. Focus Modes cannot be mapped to the FN button Problem Cannot change the focus mode without going into menu and sub menu. At present focus mode has to be changed when going from touch focus to another that allows movement of the focus point manually using the direction pad or the rather random multi-point focus a requirement if you are changing to and from EVF and LCD Display. Solution It should be possible to set the EVF/LCD focus modes in advance and map them to the FN button - or at the very least map focus mode to the FN button so as to avoid having to go into menus.Effect of Suggested Firmware Upgrade less button pushes etc. Additional button pushes - the necessity to recompose in certain scenarios - can get the camera in the way of the photography albeit not to the extent very common in other mirrorless cameras. All of the above are easy to introduce and very much in line with Leica's minimalist approach. Other Matters Less important - I would like to have the ability to take DNG and JPEG separately as in general I just bin the JPEGs anyway. I find that there is unacceptable flicker when taking pictures under fluorescent light at f/1.7 - indeed i can see lines in the image review that only appear under fluorescent light at f/1.7 . Having said that the IQ is great and while nothing is ever perfect for everyone a firmware update dealing with 1-3 and the flicker point will make the Q pretty close to perfection for me at least. Regards, Eric8255
- 4 replies
-
- Spot Metering
- EVF
-
(and 3 more)
Tagged with:
-
Hi, trotz intensiver Suche habe ich keine Information erhalten, über ein Firmwareupdate. Gab es welche und wenn ja wie viele? Und wenn ja wo kann ich sie finden - auf der L-Homepage jedenfalls nicht ! Oder habe ich etwas übersehn? Welche Speicherkartengröße und Geschwindigkeit ist möglich? Bringt eine schnelle Karte überhaupt etwas? Z.Z. benutze ich 512 MB - Standard ( finde ich sehr langsam) Bitte um kurzfristige Antwort. Danke und
- 3 replies
-
- Digilux 2
- firmware update
- (and 3 more)
-
(Got your attention didn't I?) Anyone know when a firmware update for the X1 will be released? -g
-
I just checked my Digilux 2 Infos (thx to lesh ) and remembered, that there is "only" firmware version VER 1.0A : 001D on my D2 was this the last firmware version? If not, any possibility to get a newer one? thank you for answers
-
hier http://owners.leica-camera.com/ oder als Übersicht (bald mit lustigen Kommentaren- echt amüsant !) Neue Firmware für Leica S2 | photoscala
-
- firmware
- firmware upgrade
-
(and 1 more)
Tagged with:
-
Hi all, My first post on this forum... Just became a new and proud owner of the dlux-4, which is my first Leica. I have a couple of questions someone on this board may know: - My first impression of the build is not all that great. When the camera is first turned on and the lense is fully extended, I can rock the lense stack a bit (now I did this VERY gently. There's more mechanical play than I expected from a Japanese-built gadget, and the play was enough to generate a sound, which was very plasticsy. Feels very cheap. Is this the norm for this camera or do I have a bad copy? - I want to upload to the 1.2 FW, but am having some problems. The camera didn't go thru the format routine with a blank SD mem. It asked if I wanted to delete all data, when I said yes, nothing happened. The camera went back to shooting mode on its own, and didn't do any formatting. Did anyone have this problem and how did you get around it? The SD card I used is brand new. - The FW upgrade instructions want you to do the FW upgrade in 2 steps - dl from their server onto your SD card, then from your card onto your camera. I'm wondering if I can do this in one shot - just dl it directly onto the camera via the USB cable. I haven't tried it yet, and am holding off on it until I hear some positive affirmations. Thanks in advance.