AlexP Posted February 22, 2017 Share #1 Posted February 22, 2017 Advertisement (gone after registration) For all the Leica SL owner out there that thinking about using your Canon lens via adapter, i have good news for you. Here are list of lens that i'm current have and test with the adapter.Canon Lenses:16-35mm f/4 IS: Snappy/fast AF24-70mm f/2.8 mkii: AF work. Ok speed24-105L : AF work. Speed ok35L mkii: AF work. Speed ok. Have to switch AF/MF once in awhile for the lens to communicate with the camera.100L : AF work/ average. However, it hunts quite a bit sometime for no reason.135L: Fast AF70-200mm f/2.8 mkii: AF work. OK speedCanon BIG WHITE LENS: Canon 300mm f/2.8 IS II: AF work. OK speed.Canon 400DO mkii : AF work but VERY VERY SLOW.Canon 600mm f/4L IS II: AF work but Slow.Sigma lenses:8-16mm: Fast AF. Make sure to switch your SL to APS-C mode.20mm ART: Super fast AF. almost the same as if you're using with DSLR. I'm surprised.24mm ART: Super fast AF.35mm ART: AF not working at all50mm ART: AF not working at all24-35mm ART: Ok AF18-35mm ART: Fast AF50-100mm ART: Fast AF. However, sometime the camera stop communicate with the lens. I have to turn off the camera, turn back on then AF works fast again. I'll update this list frequently. If you happen to have the same adapter but different lens from this lens, please respond so we can have a better list. 10 Quote Link to post Share on other sites More sharing options...
Advertisement Posted February 22, 2017 Posted February 22, 2017 Hi AlexP, Take a look here Novoflex Canon EF Lens to Leica SL Adapter: list of compatible/tested lenses. I'm sure you'll find what you were looking for!
blacksinner Posted February 25, 2017 Share #2 Posted February 25, 2017 Thank you so much for listing this. but still no affordable tele lens above 300mm that works well. =( Quote Link to post Share on other sites More sharing options...
JeffWright Posted February 25, 2017 Share #3 Posted February 25, 2017 (edited) All these ZE lenses make a somewhat annoying short lived buzzing sound when the aperture steps down, and there is a subtle lag after exposure, but they work well otherwise. I have no reason to expect that other Zeiss lenses won't work just fine. There is an occasional failure to communicate (1 in 50?) with the Zeiss lenses when first mounted, solved swiching off and by remounting. I've since sold most of the Zeiss lenses to fund a MF system, but they work beautifully and their corrections can be applied in Lightroom. Zeiss ZE 21/2.8 Zeiss ZE 35/1.4 Zeiss ZE 50/2 Makro Zeiss ZE 100/2 Makro Zeiss ZE 135/2 Zeiss Otus ZE 55/1.4 Zeiss Milvus ZE 85/1.4 and as has been reported previously these manual focus TS-E lenses work well: Canon 17/4/ TS-E Canon 24/3.5 TS-E II Canon 50/1.2 AF is slow as molasses, AF goes to infinity when camera wakes up or is powered up. MF is fine Canon 85/1.2 II AF is also slow as molasses, and always racks to infinity when camera wakes up. MF is fine Edited February 25, 2017 by JeffWright Quote Link to post Share on other sites More sharing options...
steppenw0lf Posted February 25, 2017 Share #4 Posted February 25, 2017 (edited) The Zeiss lenses work just as well or better with the Nikon mount and a simple Nikon adapter. The electronics only add cost but do not really add any valuable functionality. Typically they are a bit smaller with Nikon mount, and sometimes also slightly less expensive. While the electronics in the EOS mount version offers at the max 3 images per second on a SL, the Nikon-mount versions offer the same speed as other mechanical lenses (11 frames/s). The only lenses really "requiring" the Novoflex AF EOS adapter are the Canon T/S and maybe the Canon 11-24. Maybe also the EF 1.8/50 STM, but it is too cheap to justify on its own the expensive adapter. Other Canon lenses are either not so extraordinary, or work rather slowly with the AF adapter. (like the high-class "long white" lenses) So in these cases the recommendation for the adapter can only be half-hearted. Edited February 25, 2017 by steppenw0lf Quote Link to post Share on other sites More sharing options...
AlexP Posted February 26, 2017 Author Share #5 Posted February 26, 2017 how do i edit the original thread? Quote Link to post Share on other sites More sharing options...
Ingo Posted February 26, 2017 Share #6 Posted February 26, 2017 how do i edit the original thread? Ask a moderator to edit the thread title. Quote Link to post Share on other sites More sharing options...
Ingo Posted February 26, 2017 Share #7 Posted February 26, 2017 Advertisement (gone after registration) Canon EF 8-15 Fisheye: AF okay but SL recognize the lens as EF-S 17-85 in metadata. Canon EF 85 1:1.8: AF okay Quote Link to post Share on other sites More sharing options...
pop Posted February 26, 2017 Share #8 Posted February 26, 2017 how do i edit the original thread? I'm afraid the forum software allows editing your posts only during the first hour after posting. From time to time, moderators are asked to apply changes to posts which they gladly do. However, applying frequent updates to complex posts is not something we can keep up for any length of time. I can see no sensible solution at the moment. Quote Link to post Share on other sites More sharing options...
AlexP Posted February 27, 2017 Author Share #9 Posted February 27, 2017 pop, thanks for the respond. It would be helpful if i can update the list myself. As time goes by, as more people respond with new lens being test, it will get lost since you will have to scroll to more pages..while if i can update to the first thread, it would be easier for everyone to see it right away. Just a though. Quote Link to post Share on other sites More sharing options...
pop Posted February 27, 2017 Share #10 Posted February 27, 2017 .... It would be helpful if i can update the list myself. .... This is not possible with the software the forum runs on, alas. Quote Link to post Share on other sites More sharing options...
JeffWright Posted February 28, 2017 Share #11 Posted February 28, 2017 The Zeiss lenses work just as well or better with the Nikon mount and a simple Nikon adapter. The electronics only add cost but do not really add any valuable functionality. Typically they are a bit smaller with Nikon mount, and sometimes also slightly less expensive. While the electronics in the EOS mount version offers at the max 3 images per second on a SL, the Nikon-mount versions offer the same speed as other mechanical lenses (11 frames/s). The only lenses really "requiring" the Novoflex AF EOS adapter are the Canon T/S and maybe the Canon 11-24. Maybe also the EF 1.8/50 STM, but it is too cheap to justify on its own the expensive adapter. Other Canon lenses are either not so extraordinary, or work rather slowly with the AF adapter. (like the high-class "long white" lenses) So in these cases the recommendation for the adapter can only be half-hearted. True enough, and if I were buying these lenses de novo, I would perhaps recommend the Zeiss lens in Nikon mount. I already owned the ZE lenses. The auto aperture stepdown offered by the electronics of the more AF EOS adapter is rather nice for focusing wide open or in lower light levels (in the absence of significant focus shift). Quote Link to post Share on other sites More sharing options...
James_183 Posted February 28, 2017 Share #12 Posted February 28, 2017 Thanks for your help! Quote Link to post Share on other sites More sharing options...
AlexP Posted March 3, 2017 Author Share #13 Posted March 3, 2017 update on the 24-70mm f/2.8 mkii: the lens act up today. It will focus then it won't AF at all. I have to turn off the camera, turn back on then it works again. Since i can't edit my list, here is the update for it then: 24-70mm f/2.8 mkii: AF work. Speed ok. Have to switch AF/MF once in awhile or turn camera off for the lens to communicate with the camera. Quote Link to post Share on other sites More sharing options...
YellowBelly Posted March 3, 2017 Share #14 Posted March 3, 2017 I'm wondering if it works with the 11-24mm canon lens? Or 85mm Art Sigma I also believe there's going to be a 135mm Art lens coming soon! Sent from my iPhone using Tapatalk Quote Link to post Share on other sites More sharing options...
Constable Posted March 3, 2017 Share #15 Posted March 3, 2017 I'm wondering if it works with the 11-24mm canon lens? Or 85mm Art Sigma I also believe there's going to be a 135mm Art lens coming soon! Sent from my iPhone using Tapatalk Just tested with the 11-24 and it works perfectly Ed 2 Quote Link to post Share on other sites More sharing options...
YellowBelly Posted March 3, 2017 Share #16 Posted March 3, 2017 I don't need much encouragement was always wanting 13mm nikkor but 11-24 canon will be better for wallet and optically wonderful :-) Sent from my iPhone using Tapatalk Quote Link to post Share on other sites More sharing options...
James_183 Posted March 4, 2017 Share #17 Posted March 4, 2017 When I shoot with Canon 35L II & 85L,SL will be dead sometimes after clicking the shutter button.I have to reject the battery and reload it. Is anyone else having this problem with it ? Quote Link to post Share on other sites More sharing options...
AlexP Posted March 15, 2017 Author Share #18 Posted March 15, 2017 i'm extremely happy to report that Sigma 85mm ART works. AF SUPER fast. 4 Quote Link to post Share on other sites More sharing options...
Ivar B Posted March 16, 2017 Share #19 Posted March 16, 2017 i'm extremely happy to report that Sigma 85mm ART works. AF SUPER fast. I have exactly the same experience and I am very pleased. In addition, the optical performance of this lens is outstanding. Just had a note from a professional photographer who had replaced his Zeiss Otus 1.4/85 with the Sigma lens, and autofocus was not the only reason. 1 Quote Link to post Share on other sites More sharing options...
Leicaiste Posted March 16, 2017 Share #20 Posted March 16, 2017 How does the AF speed of the 85 Art on the SL compare with the SL 50/1,4 AF ? Quote Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.