DezFoto Posted January 27, 2017 Share #1 Posted January 27, 2017 Advertisement (gone after registration) Hi all, I messed up and exposed half a roll of Tri-x 400 at 50, then 400. I don't develop myself but is there any instructions I can give the lab where both exposures could be saved, or do I need to pick one? Quote Link to post Share on other sites More sharing options...
Advertisement Posted January 27, 2017 Posted January 27, 2017 Hi DezFoto, Take a look here Messed up exposure, advice needed. I'm sure you'll find what you were looking for!
Michael Geschlecht Posted January 27, 2017 Share #2 Posted January 27, 2017 (edited) Hello DezFoto, It might be OK with normal development. When you hold the film cartridge with the little "nubbin" to the left & read the film cartridge little squares LEFT TO RIGHT: What do they read? For example: White, black, black, white, white, black on the top row? Or something like that. 1 thru 6 on the top & then 7 thru 12 below. Best Regards, Michael Edited January 27, 2017 by Michael Geschlecht Quote Link to post Share on other sites More sharing options...
mikemgb Posted January 27, 2017 Share #3 Posted January 27, 2017 Basically you have overexposed one half of the film by three stops, black and white film generally has enough latitude to cover that. The negs will be very dense but still usable. If I was home processing this film though I would probably pull the film by one stop. That way neither half will be perfect, but both will still be pretty good. 3 Quote Link to post Share on other sites More sharing options...
250swb Posted January 28, 2017 Share #4 Posted January 28, 2017 I think you'll find everything is OK, not perfect but OK. Have it processed as if a normal roll, the latitude of the film should (hopefully) give usable negs for both under and over exposed shots. 1 Quote Link to post Share on other sites More sharing options...
DezFoto Posted January 29, 2017 Author Share #5 Posted January 29, 2017 Thanks everyone, I appreciate the help! It'll serve as a reminder to check my ISO setting on my M6 when I load the camera. I guess in hindsight I should have just left it at 50 and over exposed the whole roll and then had it pulled 3 stops in development. 1 Quote Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.