Frank Sellitto Posted September 29, 2016 Share #1 Posted September 29, 2016 (edited) Advertisement (gone after registration) I put this in the 'street photography' forum with little to no response. I happen to have several rolls of delta 3200 It took several recipes to get satisfactory results. This image was pulled to 1000 asa and developed in hc-110 b. I can see using this combo for highly structured compositions and thought I would share the results with film shooters. Frank i meant for this to be posted in the 'i like film' thread. It's been that kind of week......sorry for the confusion! Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Edited September 29, 2016 by Frank Sellitto Quote Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/265057-roof-top/?do=findComment&comment=3121118'>More sharing options...
Advertisement Posted September 29, 2016 Posted September 29, 2016 Hi Frank Sellitto, Take a look here roof top. I'm sure you'll find what you were looking for!
dpitt Posted September 30, 2016 Share #2 Posted September 30, 2016 i notice a lot of grain? Did you scan with ICE on? If it shows on the negative, I would have expected better results from a pulled 3200 film. But maybe that is just my inexperience with film showing... Quote Link to post Share on other sites More sharing options...
Michael Hiles Posted September 30, 2016 Share #3 Posted September 30, 2016 I think the picture is interesting, what with the upside down bike. Technically, it is not clear what your goals are. Dirk is right – it is very grainy, much more than I would expect or than I would accept for any of my work (you are not me – right). Conventionally speaking, the “print” is very flat. There are no clear whites or blacks. The chimney highlights should be totally white, and there should be some completely black areas, probably one of the small windows, or maybe the rear tire of the bike. Mainly the middle tones will take care of themselves. This should be easily fixable in any image software such as Photoshop Elements (Silver Efex Pro is fabulous in this regard, and it is now free). For this kind of picture, most people I know would advise against Delta 3200. I would suggest XP2 (C41) or Delta 100 developed in Spur HRX – either will be sharp and essentially grainless with long tones. Delta 3200 will in the best circumstances be grainy, even with an ideal developer (I don’t know what it would be). Maybe you intend grainy, but it does not seem to me to add to the picture – I think it is a distraction. To be clear, I am not trying to be offensive or dogmatic (perhaps unsuccessfully). However you asked for a response, and it seems to me that the picture has lots of unrealized potential. Quote Link to post Share on other sites More sharing options...
Frank Sellitto Posted October 24, 2016 Author Share #4 Posted October 24, 2016 I think the picture is interesting, what with the upside down bike. Technically, it is not clear what your goals are. Dirk is right – it is very grainy, much more than I would expect or than I would accept for any of my work (you are not me – right). Conventionally speaking, the “print” is very flat. There are no clear whites or blacks. The chimney highlights should be totally white, and there should be some completely black areas, probably one of the small windows, or maybe the rear tire of the bike. Mainly the middle tones will take care of themselves. This should be easily fixable in any image software such as Photoshop Elements (Silver Efex Pro is fabulous in this regard, and it is now free). For this kind of picture, most people I know would advise against Delta 3200. I would suggest XP2 (C41) or Delta 100 developed in Spur HRX – either will be sharp and essentially grainless with long tones. Delta 3200 will in the best circumstances be grainy, even with an ideal developer (I don’t know what it would be). Maybe you intend grainy, but it does not seem to me to add to the picture – I think it is a distraction. To be clear, I am not trying to be offensive or dogmatic (perhaps unsuccessfully). However you asked for a response, and it seems to me that the picture has lots of unrealized potential. LOL!!! Sent from my iPhone using Tapatalk Quote Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.